Close

9810 Results for "%s"

  • Led Grow Light

  • I need 2 Led lights with a length of 90cm. They will have 2 times 300 Led's and 12V/2A each one It will be a mix of red and blue Led's. Green is not needed, because the plants reflect the green light
  • DIY Micro set

  • Once upon a time there were hifi micro sets (casssettes, CD's and mini-disc) and portable radio's. However in the land of technology it began to change and now we use streaming services like Spotify.I wanted to build a micro set based on Raspberry Pi...
  • SecSavr Skyrise [gd0092]

  • This printer has a 700mm Z height, and I don't remember the XY but it should be around 200mm. It's a CoreXY and uses dual 6028 blower fans for printing thick layers in PLA and 2 5kg weights in the base. It's designed to fit in the build volume of a CR10....
  • P2-Stamp

  • The size of the flash and RAM are purely chosen on the basis of current Digikey stock availabilities, and can be downgraded or upgraded as per specific needs. The HyperRAM uses an 8-bit bus, thus releasing more of the Propeller's smart I/O's to the outside...
  • Ternary/Trits & Trytes

  • //The following is intellectual property. It may //be use for investigation, if want to use for //commercial, please contact me at my email //santo_mar_d_velaz@hotmail.coms= null; // -s if n>>s and s if ns.aS=cS%t; // the final filter, variable we use.x=n(3^aS)/M;...
  • pi2meter

  • Analog meters are a current measuring device. (If you have a meter that's designed to measure voltage you can still use it in this project: it's actually a current meter with an internal resistor. Simply open the meter up and short out the internal resistor...
  • Time Circuits Timepiece

  • Road map Done Design and build an enclosure reminiscent of a single section/row of the time circuitsCap open ends and access ports on the enclosure with 3D printed partsSource material for display covers (transparent perspex/acrylic)Create a schematic...
  • A LA QRTE: QR Code Menu Printer

  • I'm working on a schematic for this, but it's taking a while since I'm using so many "module" parts that dont have symbols. In the meantime, here's a description of what's going on:Power comes from a rechargeable 12V battery, which is cut off from the...
  • Reprap Busby

  • It's a printer that fits entirely inside a 150mm cube. Why would anyone want that? Because wearables are the future, and I'm making wearable manufacturing a reality.The real story is it's just a very small printer with a 50mm^3 build area. CoreXY mechanism,...
  • DSPIC33 SQI

  • It's a small dev board for experimenting with the DSPIC33 series of chips. I grabbed these a while ago as I wanted to play with both their analog features as well as the JTAG interface. Although I hear the latter is limiting, I though it'd be fun.Testing.There's...