Close

9604 Results for "《〈 문의 OIO↗5793↗7458 》〉 셔츠룸후기た 《〈 문의 OIO↗5793↗7458 》〉 ⑷plenty㎋셔츠룸후기셔츠룸후기んteeth 셔츠룸후기선릉셔츠룸 강남셔츠룸￦셔츠룸ⓤsilverⓞ"

  • Elektronika 7-06 clock replica
  • Details     from Elektronika 7-06 clock replica
  • Okay here's the specs:Dimensions: same as the original, measured from photos.Display: LEDs for every dot (found one one that light up in the exact same color as the phosphors in the original VFDs). That's 266 LEDs. LEDs shall be housed in a plastic matrix...

  • LiDAR as an input device
  • Details     from LiDAR as an input device
  • What I need is a system for interacting with a floor projection, both on and just outside of the projection area. There are ready-to-go systems that can do this to some degree. These are often fancy ceiling mounted devices with an IR camera that can...

  • Hourglass Clock
  • Details     from Hourglass Clock
  • When I finished the clock I put together a quick video describing the clock. There wasn't any video to speak of that was taken during construction though there were a bunch of pictures. This details section walks through many of the steps that were taken...

  • Repairs for our FTC robot
  • Details     from Repairs for our FTC robot
  • Further modifications: We will continue to design and print 3D replacements for our robot, because things always break on our robot.We will try to improve our 3D models for the phone support, for the end caps, and for the strain reliefs to provide better...

  • A better Bluetooth Speaker
  • Details     from A better Bluetooth Speaker
  • Here's the quick once-over for some project details:Inputs:-Bluetooth audio input, capable of AAC and Apt-X transport if possible-SPDIF input, stereo, 28kHz 24-bit-3.5mm jackOutputs:2 tweeters, stereo2 woofers, paired together (mono)Why the two woofers...

  • Einstein-Rosen Bridge (WiFi)
  • Details     from Einstein-Rosen Bridge (WiFi)
  • I have build two Raspberry Pi based boxes that connect to each other via WiFi on Channel 1 (2.4GHz) since no other WiFI AP in the area is using that channel, so I get a nice high-speed uncongested link.The WiFI dongle on my end is in AP mode, serving...

  • Open Source Modular Test Bench
  • Details     from Open Source Modular Test Bench
  • To start with, this project would require an enclosure to hold the main control board, backplane, and all associated daughter boards/modules. This could be done like the PXI chassis or it could be set up where every module is in it's own case (for instance...

  • "Alien" Cuckoo Clock
  • Details     from "Alien" Cuckoo Clock
  • The Alien Cuckoo Clock consists of several discrete pieces that will be combined to form the clock. The different pieces are:FacehuggerChestbursterClock mechanismCuckoo mechanismMannequinElectronicsThingiverse is a great repository for premade 3D printed...

  • Hardly-a-Hack DPS Housing
  • Details     from Hardly-a-Hack DPS Housing
  • On a whim I picked up a 20 cu in carlon old-work box and shoved a DPS3005 power supply module into it... to my suprise it fit! The DPS unit has springy plastic retention tabs that hold it snugly in the box, and I saw that there was still space at the...

  • breakout game on PIC12F1572
  • Details     from breakout game on PIC12F1572
  • You may think that your modern TV doesn't accept NTSC signal and you are probably wrong. Check for YPbPr  input at the back. The green connector is probably also an NTSC composite input. It is the case with my 3 years old RCA TV and was the case...

  • MIKBUG on Multicomp
  • Details     from MIKBUG on Multicomp
  • MIKBUG was the classic Motorola ROM for the MC6800 CPU.  Engineering Note 100 has the original source code. The downside of the original code is that it used bit-banging of a Parallel port for serial I/O.  There is some recent work on MIKBUG. ...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday