131 Results for "《 예약문의 OIO≡⑧④89≡83O⑥》선릉레깅스룸㉹ベgrace레깅스룸Ｓ선릉레깅스룸선릉레깅스е я레깅스룸비용superstition 강남레깅스룸′강남레깅스§８fetch"

Universal undervoltage lockout up to 34V input
Details from Universal undervoltage lockout up to 34V input
DISCLAIMER: After getting some attention because of this hackaday.com write-up I need to tell you the following: This is a work in progress and NOT YET a safe and "turn-key" board which you could or should implement in your design blindly. At the...

Communicating with Siemens S7–1500 Controller
Details from Communicating with Siemens S7–1500 Controller
Wiring the Hardware The S7-Controller requires power supply of 24V DC. Simatic PM1507 is used to power up the S7-Controller that converts input 230 V AC to output 24V DC. The power supply consist of small connector for connecting input 230 V AC. The...

Rotation Sensor Module
Details from Rotation Sensor Module
Rotation Sensor Module Introduction SENZ001 Rotation Sensor is arduino compatible multi-ring rotation analog sensor. It is based on multi-turn precision potentiometer. It can rotate upto 10 laps. If the sensor input 5V voltage power, then...

Sensitive touch pad (without dedicated ICs)
Details from Sensitive touch pad (without dedicated ICs)
Introduction A capacitive touch pad is something quite simple. If you google it, probably will easily find a bunch of material explaining how it works. Today there are some dedicated ICs as well as hundreds of microcontrollers that have some IOs...

Remora
Details from Remora
The idea of Remora is to make a very simple animator tool that can be triggered from any sequencer or software that is capable of sending UDP messages to an IP address and port. This does not need internet. It just needs to be in the same WiFi network...

How To Make Bicycle Horn
Details from How To Make Bicycle Horn
➢Step descriptions: ✦Step 1:-Prepare all the part need in this videos: BC547 X1, 330ohms resistor 0.5W X1, RGB LED X1, 5V Buzzer, 220ohms resistor 0.5W X1. ✦Step 2: -Solder the BC547 and 330ohms resistor as showed in the pic below....

RGB LED Strip Controller Circuit
Details from RGB LED Strip Controller Circuit
➢Step descriptions: ✦Step 1:-Prepare all the part need in this videos: 8050 transistor X3, 220uF capacitor 8*10mm X3, 10k resistor 0.5W X3, RGB strip DC 12V X1 and Some wire jumpers ✦Step 2: -Solder all the transistors, capacitors and resistors...

Kube v2 Home Automation Sensor Platform
Details from Kube v2 Home Automation Sensor Platform
The design currently contains four modules, including: Base module (with NodeMCU, breakout headers, 74HCT125N level shifter and external connectors/spots for DHT22 sensor)Power Supply module (with AC/DC, DC/DC and POE-level power supply options, to provide...

Top 5 Project You Must to DIY
Details from Top 5 Project You Must to DIY
Some screenshot of the step. Product list: IC: IR2153 http://bit.ly/2Ne2itF Resistor: Resistor 100K http://bit.ly/2WmR1ud Resistor 47K http://bit.ly/2Th6bn6 Resistor 22Ohm/2W http://bit.ly/2XqF8oJ Resistor 10K/2W http://bit.ly/2Y7F6RA Capacitor:...

700W AUDIO SMPS NEW VERSION, Utsource view
Details from 700W AUDIO SMPS NEW VERSION, Utsource view
1. All the parts we need in this project. 2. Screenshot of the steps. 3. Finished. Product list: IRF 740 X2: http://bit.ly/2GCBjaT MBR20100 X3: http://bit.ly/2JlAfsq 100K OHM X2: http://bit.ly/2DPXIOM 27 OHM X2: http://bit.ly/2WqWbWz 47K/2W...

SHIHEN
Details from SHIHEN
(In fast-forward mode. Note that the GIF is played at x8 speed.) SHIHEN is a device which colors your everyday (a bit).Have a glimpse of your favorite poems, quotes or scenes of a movie. OK, What does this device do? Let me briefly explain....

1000W Audio SMPS Peak 1500W New Version Utsource
Details from 1000W Audio SMPS Peak 1500W New Version Utsource
1. Finished project, test it. 2. Here are the part we need to use in the project. 3. Some step pics. Product list: 3K3/2W X2: http://bit.ly/2Jf1zJq MJE13007: http://bit.ly/2E7PFNv MOSFET 20N60: http://bit.ly/2LFLcI0 BD139: http://bit.ly/2F6QENs...

ARX Hand Project X1M
Details from ARX Hand Project X1M
ARX X1M Design Overview X1M focuses on developing an advanced mechanical design that maintains a high functionality whilst being modular and maintaining ease of assembly. The hand mainly functions off of a configurable whippletree block that drives two...

Automatic Traffic light Signal Circuit, Utsource
Details from Automatic Traffic light Signal Circuit, Utsource
Steps: 1. The items we need to make this project. 2. How to make the circuit. 3. Finished and test. Components list - 1.) Transistor - BC547 x3 https://www.utsource.net/itm/p/895975.html 2.) Resistor - 1K x3 https://www.utsource.net/itm/p/9267119.html...

Floppy Controller for RC2014
Details from Floppy Controller for RC2014
This board provides a floppy disk controller for the RC2014 system. Unlike the existing controller it fits the form factor and also provides support for dual crystals for non speed changing drives or handling weird formats. A pair of 74HCT138's decode...

|<
<
3
4
5
6
7
>
>|