Close

18994 Results for "《 예약문의 OIO↗8489↗8306》선릉레깅스┛Еimportanceム강남레깅스룸레깅스룸ㅂheavenly 레깅스룸강남레깅스 강남레깅스룸⊥선릉레깅스ゥfiercelyり"

  • Evette
  • Details     from Evette
  • I bought this Vette from a friend incredibly cheap, and to be "nice", it needs a few external parts and paint job which I'll be adding after modding. I have various ideas for what capabilities to add to this car. I comes to mind that since I'm not 20,...

  • HydraNFC Shield v1
  • Details     from HydraNFC Shield v1
  • Features of the HydraNFC embedded firmware HydraFW: Virtual Serial Port access through microUSB with VT100 terminal/shell (compatible with any hardware supporting USB Virtual Serial port). Basic UID read for Vicinity/ISO15693 (through shell command).Basic...

  • Open Source DSKY
  • Details     from Open Source DSKY
  • The original software that DSKY were all written in a assembler called YUL (“Yuletide”). Although the source code for DSKY are available on line, not everyone understand the language itself. Because of this, I plan on converting the programming...

  • Erica The Cyber Rhino
  • Details     from Erica The Cyber Rhino
  • Erica is powered by five raspberry pi computers. Two of these are used for controlling the eyes and performing computer vision on the video allowing Erica to recognise things like faces and QR codes.One controls the mechatronics inside the rhino, controlling...

  • A Watch
  • Details     from A Watch
  • The watch uses the low power MSP430G2211 MCU from Texas instruments to control the LED and mesure the time with the help of a 32kHz watch cristal. The MCU sleeps most of the time only waking up ones a second to count up the time and check if the tilt...

  • VFD and Keypad re-use
  • Details     from VFD and Keypad re-use
  • I recently picked up an old DVD player from the side of the road - a Pioneer DV-363 - mainly for recycling parts.  Upon opening I found the VFD display and half the keypad sat on a separate PCB, and used a basic serial interface.  I thought...

  • 50Watt Led portable
  • Details     from 50Watt Led portable
  • The flood light have several main components:1) Led2) Led cooling3) Led driver4) lithium battery5) aluminium  housingThe description1) LedIf i started 6 years ago with the project a 50W led was not know in our region and costs up to 100usd. Today...

  • Crane Game
  • Details     from Crane Game
  • I will use some variant of Arduino as my controller. Last year I prototyped my projects on Uno and produced using Arduino Pro Mini to save cost. I'm likely to build this on a 6 foot table/stand with 4 to 6 cranes. I think this might be simple enough...

  • Ultra Simple 2x4 Server Rack
  • Details     from Ultra Simple 2x4 Server Rack
  • A note on dimensions.  The magic of "standardization" has firmly ensured that a 19" rack actually has no 19" wide components.  Also, a 2x4 isn't really 2x4.I have attached an image which I shamelessly took from http://www.server-racks.com/19-rack.html...

  • Pegasus
  • Details     from Pegasus
  • Apologies in advance for the potato-quality photo, I'll get a better one uploaded when I have a chance. The picture is actually four of the boards as they arrived direct from our manufacturer with a penny for scale. This project was done by the now-defunct...

  • PC-Engine in a FPGA
  • Details     from PC-Engine in a FPGA
  • The ROM images are currently stored in the parallel Flash memory of the board.I plan to add support for SD-Card, and find a way to connect either original pads or USB pads, so it would be possible to actually play games. As it will require some extra...

  • SEGA Megadrive in a FPGA
  • Details     from SEGA Megadrive in a FPGA
  • The ROM images are currently stored in the parallel Flash memory of the board.I plan to add support for SD-Card, and find a way to connect either original pads or USB pads, so it would be possible to actually play games. As it will require some extra...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday