Close

6650 Results for "∇ 최저가 Ò1Ò《⑤⑦93》74⑸⑻ ∇뉴테란셔츠룸Ζ삼성동뉴테란scorn뉴테란셔츠룸강남뉴테란선릉뉴테란always 삼성동뉴테란ㆂㅣ뉴테란셔츠룸swiftly"

  • Arduino Line Follower Robot
  • Details     from Arduino Line Follower Robot
  • COMPONENTS AND SUPPLIES Arduino UNO & Genuino UNO×1SparkFun Dual H-Bridge motor drivers L298×1Proximity Sensor×1 APPS AND ONLINE SERVICES Arduino IDE ABOUT THIS PROJECT Line Follower Robot Best & Fast PCB Supplier (2$ for 10 PCBs) https://jlcpcb.com...

  • The 1kB Challenge
  • Details     from The 1kB Challenge
  • Microprocessors didn't always have Gigabytes of memory, and Microcontrollers didn't always have hundreds of kB of flash. The Hackaday 1kB challenge is a contest where entrants must create a device which uses 1kB or less of executable program code. The...

  • Simple Compiler
  • Details     from Simple Compiler
  • This project is rather large and the work is not that linear. To make the logs readable I will from time to time rewrite them.Project logs:Convert SC.PAS to SimpleC.c(done).Adjust the code for the CPU word width and memory model (done).Build tool train(done):Subleq...

  • IO881
  • Details     from IO881
  • My current plan is to separate the system into the following logical blocks: A DMA controller, interfacing to the system and controlling access to the bus in order to allow the processor to load data from or store data into memory.  The precise...

  • ONAN 1111
  • Details     from ONAN 1111
  • All right. One more retrobrew TTL CPU. What did make me want to do this kind of thing? Really, I always wanted to do it. As a kid (12-13), I played with microprocessors in the 1980s (6809 mostly). Had a C64 too. But even back then I wondered about these...

  • LED Watch
  • Details     from LED Watch
  • A special feature of the LED_Watch is its quasi-analog always-on display. This consists of 240 concentrically arranged SMD LEDs (Stanley VCDG1104P-5C63C). Two LEDs light up on the inner two rings in combination with two LEDs on the outer two rings as...

  • DIY Smartphone Charger
  • Details     from DIY Smartphone Charger
  • Things we need... General Purpose Diode x 4100 uF Capacitor x 1Linear Voltage Regulator LM7805 x 1Step down transformer x 110 nF Capacitor x 1 This project has been sponsored by LCSC.com. LCSC has over 700,000 customers and over 310 employees with around...

  • Alternative use of ESP-01 RSSI
  • Details     from Alternative use of ESP-01 RSSI
  • ESP-01: Alternative use of RSSI Normally, we use the ESP-01 wifi module to make devices that connect to the Internet; we transmit or receive information, basically to make sensors or actuators. There are tons of applications out there, some well documented...

  • Ameise
  • Details     from Ameise
  • A clock built with eight authentic soviet vacuum fluorescent display (VFD) tubes, a custom designed circuit board, firmware and 3d-printed case It is an evolution of Phalanx. Many of the firmware improvements made for Ameise also trickled down to Phalanx...

  • SHT21 Humidity sensor board
  • Details     from SHT21 Humidity sensor board
  • Nice things:The nice thing about a humidity sensor is, that only two Parameters are given out: Temperature (In fact a voltage measurement of a Silicon bandgap...)..Relative Humidity (In fact it´s a capacity which is measured physically...).But several...

  • DIY controller for robots
  • Details     from DIY controller for robots
  • Story This project will tell you how to make a simple and minimal controller for a remote-controlled car or robot made using Arduino. The controller supports the forward, backward, left and right movement along with the clockwise and anti-clockwise movement....
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday