Close

11108 Results for "《 예약문의 OIO↗8489↗8306》선릉드림Йｉhope선릉드림㈘선릉드림선릉드림레깅스룸ㅒ ㅛ선릉드림레깅스룸we'll 강남드림레깅스룸＆드림레깅스룸㎛зslow"

  • Open Indirect Ophthalmoscope
  • Details     from Open Indirect Ophthalmoscope
  • OverviewCurrently there are over 422 million people worldwide suffering from diabetes. 28.5% of them suffer from Diabetic Retinopathy(1) . 50% of diabetics are unaware about the risk of losing their vision(2). The number of cases of diabetic retinopathy...

  • "Chad" - The NFC Voting System
  • Details     from "Chad" - The NFC Voting System
  • The OriginsWhen we decided to throw a party in LA (which became know as The Gathering) I wanted it to be more than just free t-shirts and beer. Laser Graffiti popped to mind and I was glad that Ben was willing to take the lead on that project....

  • L.A.S.E.R. Tag Control
  • Details     from L.A.S.E.R. Tag Control
  • Hardware setup expects an Arduino Micro with the following hardware attached:Big Dome Button hacked to support RGB LED, microswitch normally open pin connected to pin 12, Common Anode RGB pins connected to PWM pins 9, 10 and 11.RGB Illuminated Rotary...

  • LayerOne 2014 Conference Badge
  • Details     from LayerOne 2014 Conference Badge
  • STM32103RET6 ARM Cortex (currently, if i can't make the ADC behave and the SPI SLAVE to work correctly then going to flip back to the SAM7, which would suck a lot. (which we ended up doing for this round) )  I have still continued the STM32 build...

  • Arduino-Compatible FPGA Shield
  • Details     from Arduino-Compatible FPGA Shield
  • Intending to keep this as compact as possible I'm looking at BGA packages for SRAM and std package for the SPI Flash.  The several that I've chosen will enable me to keep costs below $30 for the whole board (target = $25) and still have head room...

  • X12 Turtle Beach Headset Hack
  • Details     from X12 Turtle Beach Headset Hack
  • I needed to remove the dials and the switch from the board because I wanted to have them accessible from the rim of the ear muff. However, each of these components had a minimum of 5 pins. My approach was to use a hot air gun to melt all the solder on...

  • X12 Turtle Beach Headset Hack
  • Details     from X12 Turtle Beach Headset Hack
  • I needed to remove the dials and the switch from the board because I wanted to have them accessible from the rim of the ear muff. However, each of these components had a minimum of 5 pins. My approach was to use a hot air gun to melt all the solder on...

  • Christmas Lights Fail
  • Details     from Christmas Lights Fail
  • Hardware used.  Seeeduino v1.1 Phaktor bought this a few years back, played with it a couple of times but it just sat in his hobby bin ‘til now. Parallax LCD  http://www.digikey.com/product-detail/en/27977/27... bought from RadioShack...

  • BlindSpot
  • Details     from BlindSpot
  • Keep in mind, for windows 7+ I had to change the friendly names of each web cam so that Processing can address each one consistently. Here is a tutorial: http://www.eightforums.com/customization/15321-tu... Also, here is an Instructable to hack the power...

  • HP Touchpad Charging Wall Mount
  • Details     from HP Touchpad Charging Wall Mount
  • For a while had been wanting to experiment with having touchscreens around the house to add more home control options to a location.  Having a smartphone and older iPod touches used as remote controls, I knew they aren't always within reach or easily...

  • Pinewood Derby Police Car
  • Details     from Pinewood Derby Police Car
  • So my son, [B]  did the soldering work. His uncle help him mill out the inside of the car to fit the electronics. [B] Drilled the holes for the lights and then painted the car with little sisters help.  We tested the code on the MSP430 launch...

  • Interactive Disk Spin (2007)
  • Details     from Interactive Disk Spin (2007)
  • Interactive Disk SpinThe Interactive Disk Spin was born one fateful night when Paul took the cover off an old hard drive, started compulsively spinning the shiny platters with his finger, and then wondered "how fast am I really making it go?" Two late-night...

  • windowlicker
  • Details     from windowlicker
  • ideally, this sticks to a window, and measures noise levels through a piezo (contact mic). the other piezo is set up to knock. the rgb is for output. on this prototype, you can use the red LED for visual indicator.detail pictures show the traces running...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday