Close

8866 Results for "《〈 문의 OIO↗5793↗7458 》〉 셔츠룸가격ㅱ ╈proprietary８셔츠룸후기셔츠룸추천ヰamidst 선릉셔츠룸셔츠룸추천 셔츠룸추천※셔츠룸추천ㄴhandle㏉"

  • Z80 Microcomputer System
  • Details     from Z80 Microcomputer System
  • The heavy lifting is done by an ATmega324PA, which generates the video, interprets the PS/2 keyboard scancodes and provides a serial interface. It is clocked at 27MHz. This frequency was chosen because it can provide correct timings for both NTSC and...

  • Z80 Microcomputer System
  • Details     from Z80 Microcomputer System
  • The heavy lifting is done by an ATmega324PA, which generates the video, interprets the PS/2 keyboard scancodes and provides a serial interface. It is clocked at 27MHz. This frequency was chosen because it can provide correct timings for both NTSC and...

  • BlindSpot
  • Details     from BlindSpot
  • Keep in mind, for windows 7+ I had to change the friendly names of each web cam so that Processing can address each one consistently. Here is a tutorial: http://www.eightforums.com/customization/15321-tu... Also, here is an Instructable to hack the power...

  • Pinewood Derby Police Car
  • Details     from Pinewood Derby Police Car
  • So my son, [B]  did the soldering work. His uncle help him mill out the inside of the car to fit the electronics. [B] Drilled the holes for the lights and then painted the car with little sisters help.  We tested the code on the MSP430 launch...

  • Interactive Disk Spin (2007)
  • Details     from Interactive Disk Spin (2007)
  • Interactive Disk SpinThe Interactive Disk Spin was born one fateful night when Paul took the cover off an old hard drive, started compulsively spinning the shiny platters with his finger, and then wondered "how fast am I really making it go?" Two late-night...

  • Watercolorbot with a laser
  • Details     from Watercolorbot with a laser
  • This Project is to add a 2 watt laser module to the WaterColorBot.The Lasers power and controls go through a arduino.The laser will activated by a micro switch which is under the holder (the holder is where the laser and heatsink will be mounted)

  • BareDuino Nano
  • Details     from BareDuino Nano
  • Since I’m on a student budget, I couldn’t afford to leave an actual Arduino into my projects, so I designed, etched and assembled the BareDuino classic. I can quickly throw one into a project without having to worry about using an expensive regular Arduino.Using...

  • Wearable computer
  • Details     from Wearable computer
  • This project has several components, each of which might potentially be its own project:1) The modded monocular head-mounted display/goggles2) The haptic glove interface3) The dehumidification mechanism for the goggles4) The software stack for implicit...

  • ATtiny85 Kettle Thermostat
  • Details     from ATtiny85 Kettle Thermostat
  • Originally started with a digispark, right now using a bare ATtiny85 - MIGHT need to switch to ATtiny84 for more pins... I just have to go get one!Currently using an I2C 16x2 display which is overkill and too big, going to switch to 7 segment LED x 2...

  • Ksp Control Center
  • Details     from Ksp Control Center
  • Rudimentary display of data works, most of the keypresses works as well. I still need to write a few formatting-functions for the data and make an actual case for the thing. The keyboard/control part is just a 6x7-matrix read via the Keypad library.It...

  • The Red Alert Alarm Clock
  • Details     from The Red Alert Alarm Clock
  • The Red Alert Alarm features a 3 pronged attack on your unconsciousness. First a 1000W flood light will turn on to help simulate sunlight. Shortly there after a 120db siren will go off for 2-3 seconds. This is enough to scare the bejesus out of a lot...

  • HydraBus v1 Rev1.5
  • Details     from HydraBus v1 Rev1.5
  • HydraBus v1.0 Rev1.5 In Stock on DigiKey:https://www.digikey.com/en/products/detail/benjamin-vernoux/hydrabus-v1/15652912 Features of the HydraBus board: Very small board only 60mm x 37mm size (extensible with shield which can be connected on top or...

  • Network Amplifier
  • Details     from Network Amplifier
  • I bought an XMS amplifier from a friend years ago and although it was serving it's purpose I got quite frustrated with having to toggle the loudness feature every time the input was changed. This was the beginning of what has now become my network enabled...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday