Close

8866 Results for "《〈 문의 OIO↗5793↗7458 》〉 셔츠룸후기た 《〈 문의 OIO↗5793↗7458 》〉 ⑷plenty㎋셔츠룸후기셔츠룸후기んteeth 셔츠룸후기선릉셔츠룸 강남셔츠룸￦셔츠룸ⓤsilverⓞ"

  • OpenRC Transmitter
  • Details     from OpenRC Transmitter
  • Intro Most of my robots use ble, xbee or lora radios to communicate with custom built transmitters, but no matter how cool my robot was I was always holding a weird remote, or reusing a ps3 controller. But for me that was not good enough. A major drawback...

  • MIKBUG on Multicomp
  • Details     from MIKBUG on Multicomp
  • MIKBUG was the classic Motorola ROM for the MC6800 CPU.  Engineering Note 100 has the original source code. The downside of the original code is that it used bit-banging of a Parallel port for serial I/O.  There is some recent work on MIKBUG. ...

  • Isolated USB null modem
  • Details     from Isolated USB null modem
  • As you look at the schematic, note that there are two 5 volt rails and two grounds. Nothing is allowed to cross over the isolation barrier at all (except light inside the isolators). We need to move 3 signals in each direction. The SI8035 is a logic...

  • 89C52 clock board
  • Details     from 89C52 clock board
  • This is a clock board designed to mate with the 6-segment or 7-segment display boards that I previously published. It interfaces to a DS3231 module for accurate timekeeping. The design is conventional. As there is plenty of room on the board, it supports...

  • ATTINY_85 Sheild
  • Details     from ATTINY_85 Sheild
  • When I started I decided that I wanted to build a board that would allow me as much flexibility with an attiny85 as possible. I used Kicade to create this project. I had worked with the Digispark board that was built with an SMD attiny85 and wanted to...

  • Analog phone dialer
  • Details     from Analog phone dialer
  • Introducing a small board that "reads" the numbers on an old rotary dialer phone and outputs the proper DTMF tones to perform calls over a modern phone line (more info available on my website). How it works? The board can be divided into three different...

  • E-Kart: The electric Go Kart
  • Details     from E-Kart: The electric Go Kart
  • For our final technical project we decided to build an electric go kart using commonly available components. The requirements were to implement project management principles, hardware, and software design. The project build time was about 3 months, but...

  • ROBOTIC Arm in plexiglass
  • Details     from ROBOTIC Arm in plexiglass
  • The robotic arm is also something coveted by the makers, for the fascination it exerts as the first, perhaps most significant, a step towards the construction of a humanoid robot. The importance assumed in various sectors by this portion of robots makes...

  • Engelbart Keyset
  • Details     from Engelbart Keyset
  • If you watch the Mother Of All Demos, you can see Douglas use the keyset in conjunction with the mouse. The keyset by itself only has five buttons. That's enough for the 26 letters in the alphabet, but not much more. In order to expand the space, more...

  • The Kasei Initiative
  • Details     from The Kasei Initiative
  • (Productized artist's rendering. Background image from nasa.gov: http://www.nasa.gov/mission_pages/chandra/multimedia/ngc6240.html NASA does not sponsor or endorse the Kasei Initiative and I am not affiliated with them in any way.)Since children are...

  • Tilt Rotor VTOL RC aircraft
  • Details     from Tilt Rotor VTOL RC aircraft
  • Overview: This craft is based on existing design by Flite Test for a flying wing style aircraft.  It composed entirely of paper-line foam project boards (like the ones your grade school presentations would be glued to).  These are available...

  • 3D Printed Syringe Driver
  • Details     from 3D Printed Syringe Driver
  • Syringe Driver w/ Acoustic Levitator (bad audio warning!): Syringe Driver Demo: About the gears and drive mechanism: A large gear is attached to the output of the DC motor. This large gear interfaces with a smaller gear which is fitted to a helical corkscrew...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday