Close

1705 Results for "3D printing"

  • Nexus 7 2013 Sim Card Tray

  • Shortly after getting a 3D printer, I had to remove the Micro SIM from the 2013 Nexus 7 I keep on my dashboard. When the holder fell to tens of pieces in my hands, I realized I could probably concoct a workable stand-in that I could print. I didn't even...
  • Wifi Module For 3D Printer(ESP32)

  • At present, most of the wifi solutions of 3D printers are implemented based on the serial port sending Gcode commands one by one.There will be many problems in this way, such as the baud rate communication rate is not high, the continuous printing cannot...
  • 3D-printable shredder

  • To drive the shredder i used the gearbox i mentionned above. Project can be found here: https://hackaday.io/project/173854-3d-printed-high-torque-servogearbox-version-2 The gearbox was powered by a 3S 2200mah LIPO battery with the help of the Universal...
  • Homemade 3D printer

  • Part 1 :Part 2: Part 3:Part 4:I kept saying nylon plastic in my previous video , i'm not using the proper filament for 3D printing , i'm actually using the filament that is used by the grass cutting machine !, it's a very tough material and i believe...
  • Repairing a food processor

  • Project cpntributing for the "Organization Prize" organization : PFT INNOVALTECH (France) www.pft-innovaltech.fr files can be downloaded on this project page, or here : https://www.thingiverse.com/thing:2796285 1 - Introduction Sustainable development...
  • Stepper Delta Robot

  • Parts Required 1x Arduino UNO1x CNC shield3x 28byj-48 Stepper motor3x Limit switch6x 7x40mm Springs (end to end)6x M3 nuts30x M3 screws3D printed parts1x base3x arms6x connecting rods3x parallels1x platform Printing The parts do not need to be printed...
  • Solar Scare Mosquito 2.0

  • "A picture is worth a thousand words", right? So here we go:  BILL OF MATERIALS  ITEMCOST (€)1.Arduino MKR GSM 140059.902.6V Solar Panel + USB Charger 24.003.6V DC Mini Air Pump5.004.Sound Sensor Module2.405.Water Level...
  • Prismatic Scara

  • Update: the C-Space of the pristmatic is bigger than the C-Space of a regular Scara. This, due to the linear movement. It's expanded with lines of different slopes, but it leads to difficult poses to the manipulator that makes hard controlling it's cinematic....