Close

19604 Results for "㈎ 뉴원더풀포커 ㉦ rgg799.top ㄽ 게이밍 노트 북 ㆊ 윌리엄힐사이트 ㉬ 온라인포커룸 ㅙ 고스돕홈페이지 ㄿ 리얼머니바둑이 ㆀ 빅뱅게임 ㉮ 백두산맞고"

  • DDC-01
  • Details     from DDC-01
  • IntroductionFair WarningFrom the Top Down - 1From the Top Down - 2

  • DuoDeck Type
  • Details     from DuoDeck Type
  • Built into this device are the following: - Two fans, toggled via switch on top - Direct access to Arduino prototyping pins, exposed at the top of the shell - USB expansion with toggle switches - A cigarette lighter port, matching...

  • LightCube
  • Details     from LightCube
  • To do:   Create new case that can accept 4 pieces of acrylic.  Top, front, left and right.Addressable LED's for all 4 sides 

  • Mondrian Inspired Work Table
  • Details     from Mondrian Inspired Work Table
  • After a search & rescue for the rogue scrap pieces hiding, we tossed them in a pile on the floor and started our game of analog Tetris.We decided to use an IKEA Expedit as the base which is about 15.5" x 60" and give it a roughly 36" x 60" top. I had...

  • Water temperature mk2
  • Details     from Water temperature mk2
  • The core of the probe is three 4xAA battery holders glued together. The top one have no battery connectors left but instead are used to attach the Feather and sensor. The two bottom battery holders are wired in parallel to the battery-port of the Feather.At...

  • Air Pressure Quadcopter
  • Details     from Air Pressure Quadcopter
  • This unique Quadcopter idea goes like this..Top Duct Air intake (Intake vents on top, Remote Control Module inside)Remote Control Module (Controls all motors and motor speeds inside unit)Fan 1 (Moving at high speed drawing air into the unit)Top Motion...

  • RC Battle Spinning Top
  • Details     from RC Battle Spinning Top
  • This is a spinning top design that uses a Hemispherical Gimbal drive system that has been minimised to fit inside of a hand held toy. The hemisphere will rotate with the outer body. The angular momentum of the spinning top will drive the hemisphere....

  • Stick Lumber Storage
  • Details     from Stick Lumber Storage
  • Here are the final demensions of my build. There are two shelves each 12 inches wide by 96 inches long. The shelves are suspended from two vertical 2x4s that are attached to the ceiling with 3/8inch lag screws into the ceiling joists as well as 3-1/8...

  • tinyClock
  • Details     from tinyClock
  • Display: Top Digit shows hours, bottom-right is 1, left is 2, top-right is 4 and left is 8, lastly middle segment is 16. Middle Digit shows minutes, same as hours, with difference that instead of the middle part showing 16, I assigned the middle-right...

  • Nibbler Table Saw
  • Details     from Nibbler Table Saw
  • I saw this Hackaday Article based on this project and decided to build my own version for my kids.  I've made a couple changes from the design that was show in that project and wanted to share those along with my thoughts. Summary of Changes...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday