Mooltipass is composed of one main device and a smartcard.On the device are stored your AES-256 encrypted passwords. The smartcard is a read protected EEPROM that needs a PIN code to unlock its contents (AES-256 key + a few websites credentials). As...
This project is currently GPLv3 licensed.You just type voicecommand -e to edit the configuration file and add any speech and the coinciding command. You can see all of the little nifty commands it can recognize just with my config file in the video....
So my son, [B] did the soldering work. His uncle help him mill out the inside of the car to fit the electronics. [B] Drilled the holes for the lights and then painted the car with little sisters help. We tested the code on the MSP430 launch...
Arduino's SoftwareSerial library, based on NewSoftSerial by Mikal Hart, works pretty well for simple projects hwere you only do one thing at a time. But it keeps interrupts disabled during the entire byte plus start and stop bits. For reception,...
Interactive Disk SpinThe Interactive Disk Spin was born one fateful night when Paul took the cover off an old hard drive, started compulsively spinning the shiny platters with his finger, and then wondered "how fast am I really making it go?" Two late-night...
ideally, this sticks to a window, and measures noise levels through a piezo (contact mic). the other piezo is set up to knock. the rgb is for output. on this prototype, you can use the red LED for visual indicator.detail pictures show the traces running...
ED (Electronic Discovery) is specifically designed to engage a family with a friendly faced gadget which is easy to assemble, write code for and encourages them to interact. Ideally this makes electronics a family hobby rather than something Dad does...
Since I’m on a student budget, I couldn’t afford to leave an actual Arduino into my projects, so I designed, etched and assembled the BareDuino classic. I can quickly throw one into a project without having to worry about using an expensive regular Arduino.Using...
The design consists of two servos, mounted in a way in witch one servo pans the other on an x axes, while the other servo tilts a laser on it's y axes. The laser is turned on and off with a transistor, and a camera shutter control is operated by a transistor....
This is for the large blue box version of the YOOCNC 3020/6040, since it fits in the existing PCB stand offs and uses the same connectors.I added inputs for limit switches etc, so they just have to be run around the machine and a few micro switches added...
This project has several components, each of which might potentially be its own project:1) The modded monocular head-mounted display/goggles2) The haptic glove interface3) The dehumidification mechanism for the goggles4) The software stack for implicit...
Originally started with a digispark, right now using a bare ATtiny85 - MIGHT need to switch to ATtiny84 for more pins... I just have to go get one!Currently using an I2C 16x2 display which is overkill and too big, going to switch to 7 segment LED x 2...
This was a project a few months in the making. I originally started it while I was still at SpaceX but really got to focus on it right before burning man 2013. I really wanted an 8 ft long carbon fiber staff with a ton of full bright white capable RGB...
Typically, a user should create a pointer to a cfg_struct, initialize it with cfg_init(), and then perform actions on that object (lookup, add, delete) by passing the pointer to the functions here. At end of use, call cfg_free to clean up the object....