Close

712 Results for "soil+sensor"

  • Weather Station Featherwing
  • Details     from Weather Station Featherwing
  • This Featherwing is a weather station that lets you monitor ambient temperature, humidity, pressure, light, and assorted gasses. All of this can be recorded onto an SD card. The board uses 3 different sensors to monitor this information. The AS3935 ...

  • smart aquaponics - v2
  • Details     from smart aquaponics - v2
  • building the physical gardenwe will need a safe and well thought out design, especially for the things you cannot see – the bacteria. that means correctly sized aquaculture components, proper mechanical and biological filtration, and sufficiently sized...

  • Dual Axis Solar Tracker V2.0
  • Details     from Dual Axis Solar Tracker V2.0
  • Our original 2015 Solar Tracker was more concerned with physical mechanics than it was about electronics and this proved to be its biggest downfall. When we started redesigning this project we made the decision to change our wiring from a 'bundle of...

  • Aquaponic IoT Controller (NFT)
  • Details     from Aquaponic IoT Controller (NFT)
  • MotivationMy motivation for doing this project was to make life easier to all those aquaponics enthusiasts by automating the system so they can have a better control and monitoring of the system, and to allow them to experiment more easily with different...

  • Arduino LED Project
  • Details     from Arduino LED Project
  • Mounting the circuit Let's start mounting the circuit. Always unplug the USB cable out of your computer for safety reasons. First, place the ultrasonic sensor horizontally onto the breadboard. Behind, the sensor, insert the 4 jumper wires into the pins....

  • Turtle Sense
  • Details     from Turtle Sense
  • The sea turtles found in the waters of Cape Hatteras National Seashore are protected by the U.S. Endangered Species Act, an extremely powerful law, that must be followed and administered by the National Park Service (NPS). While the NPS must protect...

  • Open-Source inverted pendulum
  • Details     from Open-Source inverted pendulum
  • About the mechanical structure I built this inverted pendulum using some standard mechanical structure except the 3D printed parts.  You can find all the standard component in hardware store. About the PID control algorithm You may familiar...

  • Line Follower Robot 2WD Arduino
  • Details     from Line Follower Robot 2WD Arduino
  • This project is sponsored by JLCPCB - Printed Circuit Board Factory. Introduction The use of sensors programmed by means of Arduino in Arduino robot is present in several competitions known as competitions for line follower robot, and this article refers...

  • Arduino Mega+Wifi PCB
  • Details     from Arduino Mega+Wifi PCB
  • The dimension of the Shield is 109.576x65.151[mm], with 2.9 mm of thickness and two layers, slightly bigger than Arduino Mega(101.86x53.61 [mm]). Schematic Current Sensor The Current Sensor is used to measure the current going through the cables that...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday