Close

7971 Results for "《 예약문의 OIO≡⑧④89≡83O⑥》강남드림ㅮ강남드림within강남드림드림레깅스룸강남드림레깅스룸horrid 드림레깅스룸ギ∑드림레깅스룸thorough"

  • Arduino Line Follower Robot
  • Details     from Arduino Line Follower Robot
  • COMPONENTS AND SUPPLIES Arduino UNO & Genuino UNO×1SparkFun Dual H-Bridge motor drivers L298×1Proximity Sensor×1 APPS AND ONLINE SERVICES Arduino IDE ABOUT THIS PROJECT Line Follower Robot Best & Fast PCB Supplier (2$ for 10 PCBs) https://jlcpcb.com...

  • L.A.S.E.R. Tag Control
  • Details     from L.A.S.E.R. Tag Control
  • Hardware setup expects an Arduino Micro with the following hardware attached:Big Dome Button hacked to support RGB LED, microswitch normally open pin connected to pin 12, Common Anode RGB pins connected to PWM pins 9, 10 and 11.RGB Illuminated Rotary...

  • LayerOne 2014 Conference Badge
  • Details     from LayerOne 2014 Conference Badge
  • STM32103RET6 ARM Cortex (currently, if i can't make the ADC behave and the SPI SLAVE to work correctly then going to flip back to the SAM7, which would suck a lot. (which we ended up doing for this round) )  I have still continued the STM32 build...

  • X12 Turtle Beach Headset Hack
  • Details     from X12 Turtle Beach Headset Hack
  • I needed to remove the dials and the switch from the board because I wanted to have them accessible from the rim of the ear muff. However, each of these components had a minimum of 5 pins. My approach was to use a hot air gun to melt all the solder on...

  • X12 Turtle Beach Headset Hack
  • Details     from X12 Turtle Beach Headset Hack
  • I needed to remove the dials and the switch from the board because I wanted to have them accessible from the rim of the ear muff. However, each of these components had a minimum of 5 pins. My approach was to use a hot air gun to melt all the solder on...

  • Christmas Lights Fail
  • Details     from Christmas Lights Fail
  • Hardware used.  Seeeduino v1.1 Phaktor bought this a few years back, played with it a couple of times but it just sat in his hobby bin ‘til now. Parallax LCD  http://www.digikey.com/product-detail/en/27977/27... bought from RadioShack...

  • Z80 Microcomputer System
  • Details     from Z80 Microcomputer System
  • The heavy lifting is done by an ATmega324PA, which generates the video, interprets the PS/2 keyboard scancodes and provides a serial interface. It is clocked at 27MHz. This frequency was chosen because it can provide correct timings for both NTSC and...

  • Z80 Microcomputer System
  • Details     from Z80 Microcomputer System
  • The heavy lifting is done by an ATmega324PA, which generates the video, interprets the PS/2 keyboard scancodes and provides a serial interface. It is clocked at 27MHz. This frequency was chosen because it can provide correct timings for both NTSC and...

  • BlindSpot
  • Details     from BlindSpot
  • Keep in mind, for windows 7+ I had to change the friendly names of each web cam so that Processing can address each one consistently. Here is a tutorial: http://www.eightforums.com/customization/15321-tu... Also, here is an Instructable to hack the power...

  • Pinewood Derby Police Car
  • Details     from Pinewood Derby Police Car
  • So my son, [B]  did the soldering work. His uncle help him mill out the inside of the car to fit the electronics. [B] Drilled the holes for the lights and then painted the car with little sisters help.  We tested the code on the MSP430 launch...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday