Close

780 Results for "《 예약문의 OIO↗8489↗8306》청담가라오케П㈄delightfulセ가라오케가라오케νreflected 가라오케사이즈가라오케 가라오케추천㎙가라오케ｑbring㈀"

  • DIY Internet Radio
  • Details     from DIY Internet Radio
  • What is it? This is a fully working Internet Radio with which you will be able to listen to Internet radio stations from all over the world. I will give you the instructions on how to build that DIY Internet Radio Based on ESP32 Microcontroller (Firmware...

  • HAMDECK CYBERDECK
  • Details     from HAMDECK CYBERDECK
  • Cyberdeck designs are quite diverse and when I decided to build one, my goal was to create something practical that I could use daily, not just a cool piece of tech that collects dust. This project took me over a year, during which I went through many...

  • Pinewood Derby Police Car
  • Details     from Pinewood Derby Police Car
  • So my son, [B]  did the soldering work. His uncle help him mill out the inside of the car to fit the electronics. [B] Drilled the holes for the lights and then painted the car with little sisters help.  We tested the code on the MSP430 launch...

  • ED Toy
  • Details     from ED Toy
  • ED (Electronic Discovery) is specifically designed to engage a family with a friendly faced gadget which is easy to assemble, write code for and encourages them to interact. Ideally this makes electronics a family hobby rather than something Dad does...

  • Il D'oro Bass Guitar Amplifier
  • Details     from Il D'oro Bass Guitar Amplifier
  • I've wanted to build my own amp for quite a while. For bass guitar, the selection of amplifiers you can buy is pretty lack-luster, and mid-volume studio amps are hard to find. It seems like most of what's available is either a practice amp or a stadium...

  • Crane Game
  • Details     from Crane Game
  • I will use some variant of Arduino as my controller. Last year I prototyped my projects on Uno and produced using Arduino Pro Mini to save cost. I'm likely to build this on a 6 foot table/stand with 4 to 6 cranes. I think this might be simple enough...

  • Self-Satisfied Door
  • Details     from Self-Satisfied Door
  • Unfortunately we couldn't find time to work on this project and won't before the deadline…  A pity, since the setup we imagined was pretty simple :- a container to be fixed with suckers on the door ;- a switch activated when the door opens ;- an...

  • Retro Robot Restomod
  • Details     from Retro Robot Restomod
  • This is the end result of our restoration/modification of the Hap-P-Kid Chromed Crusader toy.The original robot toy just had one motor driving the same walking/spinning/waving actions over and over again. We removed the guts of the robot replaced with...

  • Digital Pinball
  • Details     from Digital Pinball
  • Whilst I never really grew up playing pinball machines (arcades are a different story), I had the opportunity to play a full size, fully functioning White Water pinball at my previous job. I was hooked and wanted to keep playing after I came home. Thus...

  • Starfleet Communicator Badge
  • Details     from Starfleet Communicator Badge
  • This project won't have too many moving parts. Although our first intent was to get a BLE chipset and integrate it with some basic hardware to make the badge live, it turns out the chips we were looking at supported data only and weren't going to work...

  • Custom Sonic Screwdriver
  • Details     from Custom Sonic Screwdriver
  • The OLED ScreenIt was bought at Adafruit. I made all the testing and code with it on a breadboard, when it was done I unsoldered the screen and necessary components and soldered everything back on an half SOIC-28 adapter (same sapcing as the ribbon,...

  • RikonV2
  • Details     from RikonV2
  • It's really amazing what you can do with the different development boards available today. This is my 3rd attempt trying to make an autonomous Robot , well more or less autonomous . RikonV2 is the successor of my previous Robot RikonV1 . At first i was...

  • Sonic Screwdriver
  • Details     from Sonic Screwdriver
  • This is a table with some possible combinations and functions for the sonic screwdriver.Menuinputoutputcombination resultRED, GREEN, BLUE, WW, UV, IR, MIX, LUMOSfaderRED, GREEN, BLUE, WW, UV, IRTurn on LEDs with intensity responding to fader (if pwm...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday