867 Results for "《 예약문의 OIO≡⑧④89≡83O⑥》강남레깅스⒴선릉레깅스룸allowed⑧레깅스룸선릉레깅스룸선릉레깅스badly 레깅스룸견적㎸레깅스룸견적♤ⓩ강남레깅스provisions"

Daily routine monitor
Details from Daily routine monitor
The monitor shows the daily routines of one month, but stores the entire year. When the routine is accomplished, just press the corresponding day button. This changes the LED light on the button from white to green. I picked the colors green and white,...

Harbor Breeze Meshtastic Hack
Details from Harbor Breeze Meshtastic Hack
Instructions : Step 1. Unscrew 4 small screws to open the solar compartment. Step 2. Solder your battery JST-PHR-2 connector or power wires to the + and - terminals of the battery. If you don't have the proper connector you can solder directly...

Telescope Mount Controller using PERSEUS-9
Details from Telescope Mount Controller using PERSEUS-9
1. Concept As a practical application of my PERSEUS-9 computer for astronomical observation, I decided to create a hardware and software system to display the celestial coordinate system of an equatorial mount. This computer is not suited to perform...

The Companion Light v1.0
Details from The Companion Light v1.0
CONTEXT For a while now, I haven't been able to create a project outside of college. Due to the December break that had just passed, I was able to think of a weekend project (which actually took me three weekends due to several reasons) when I first...

BeetleMeter
Details from BeetleMeter
Raising a beetle is fun and wholesome but keeping an eye on the environment inside the little fella's enclosure can be stressful and complicated. For this reason, the BeetleMeter is a tiny battery-powered PCB that instantly notifies the beetle keeper...

OpenEVSE Capacitive Keypad + RFID
Details from OpenEVSE Capacitive Keypad + RFID
The OpenEVSE hardware ships with a custom-printed front cover for the Polycase ML-58 enclosure. The key idea here was to replace this with the "stock" clear cover, and use a printed PCB for the graphics, integrating capacitive touch as well to...

Breathing Mechanism for Animatronic Bot
Details from Breathing Mechanism for Animatronic Bot
Step One: Print the Enclosure I did 4 outer shells and 20% infill to help ensure the enclosure would not be prone to bending over time. Step Two: Set Your Servo to Neutral Plug in your servo to the Arduino Uno and upload the Servo Neutral sketch. This...

shell-tethered vesper
Details from shell-tethered vesper
This is a four voice analog/digital hybrid synthesizer with multiple audio parameter controlled lights. It's a wall-hanging work made with acrylic glass, freeform electronics, a 3D-printed enclosure and RGB lightpipes. The analog electronics are made...

CHEAP ESP WIFI REPEATER
Details from CHEAP ESP WIFI REPEATER
Introduction The project involves designing a PCB based on the ESP-12S module to create a WiFi repeater capable of extending the range of WiFi signals. This repeater will amplify and rebroadcast existing WiFi signals, effectively extending the coverage...

The Companion Light v1.5
Details from The Companion Light v1.5
CONTEXT After creating v1.0 of the Companion Light (check it out: https://hackaday.io/project/194589-the-companion-light-v10), it seemed that I was able to reach a wider audience for the project. Successful indeed! Now, with the upgrades planned and...

DIY Internet Radio
Details from DIY Internet Radio
What is it? This is a fully working Internet Radio with which you will be able to listen to Internet radio stations from all over the world. I will give you the instructions on how to build that DIY Internet Radio Based on ESP32 Microcontroller (Firmware...

Recording Power Supply
Details from Recording Power Supply
Disclaimer: This device is not an accurate measuring device and is intended to estimate the current consumption of the load in dynamics. The measurement error may vary within 1-2 discrete units. And please excuse my English (I am from Ukraine and...

|<
<
56
57
58