Close

24373 Results for "《 예약문의 OIO↗8489↗8306》가라오케추천Κθrelease강남가라오케ⓠ선릉가라오케선릉가라오케㉷㎠청담가라오케austrian 청담가라오케⒣청담가라오케ョゐunnatural"

  • piculear
  • Details     from piculear
  • piculearThis incomplete but slowly progressing project has the ultimate goal of producing a reliable PIC ICSP programmer that just works and can be more readily picked apart, examined, and/or replaced than a comparable Microchip programmer (for instance,...

  • SonoMKR Noise Monitoring
  • Details     from SonoMKR Noise Monitoring
  • Features Capture audio input from 1 or 2 channels (configurable)Calculate the noise level, in dB, from every channel, in thrid octave bands plus the LAeq level in dB(A), every second.Write the measured noise levels in a CSV file (file duration is configurable).Send...

  • Airsoft RC-XD
  • Details     from Airsoft RC-XD
  • is a fully functioning airsoft RC-XD . For the video function I used a gopro with a wifi backpack and streamed it to my phone, theres a bit of lag but it is fast enough for my purposes. the detonation works with a garage door opener hooked up to...

  • PCB mill for under $10
  • Details     from PCB mill for under $10
  • NOTE: This project is gradually improving. It is fully functional at this point, but it could be better.It started as a pen plotter based on the entrails of a printer. It uses a pen to draw paths from a vector graphics file(SVG file). I wanted to make...

  • Evette
  • Details     from Evette
  • I bought this Vette from a friend incredibly cheap, and to be "nice", it needs a few external parts and paint job which I'll be adding after modding. I have various ideas for what capabilities to add to this car. I comes to mind that since I'm not 20,...

  • Hexapod
  • Details     from Hexapod
  • The general idea is to use the PI and camera to perform the inverse kinematic equations and to perform obstacle avoidance, this information is passed onto the servotor32 board to set the servo positions according to the IK equations. Everything will...

  • HydraNFC Shield v1
  • Details     from HydraNFC Shield v1
  • Features of the HydraNFC embedded firmware HydraFW: Virtual Serial Port access through microUSB with VT100 terminal/shell (compatible with any hardware supporting USB Virtual Serial port). Basic UID read for Vicinity/ISO15693 (through shell command).Basic...

  • Open Source DSKY
  • Details     from Open Source DSKY
  • The original software that DSKY were all written in a assembler called YUL (“Yuletide”). Although the source code for DSKY are available on line, not everyone understand the language itself. Because of this, I plan on converting the programming...

  • Bench power supply
  • Details     from Bench power supply
  • The origional idea was to take some basic inexpensive parts from china and put them togethor to make a dual output bench supply. A primary converter from 120VAC to 35VDC is quite available, and small bucking modules from 32VDC to 0-30VDC are quite available....

  • Erica The Cyber Rhino
  • Details     from Erica The Cyber Rhino
  • Erica is powered by five raspberry pi computers. Two of these are used for controlling the eyes and performing computer vision on the video allowing Erica to recognise things like faces and QR codes.One controls the mechatronics inside the rhino, controlling...

  • A Watch
  • Details     from A Watch
  • The watch uses the low power MSP430G2211 MCU from Texas instruments to control the LED and mesure the time with the help of a 32kHz watch cristal. The MCU sleeps most of the time only waking up ones a second to count up the time and check if the tilt...

  • Candy Tin PC
  • Details     from Candy Tin PC
  • Computer: Vortex x86DX 3.5 inch form factor SBC, 800mhz Pentium class CPU, 256 MB ram, 2x IDE + CF (master IDE), SVGA + LVDS LCD io, 3x USB, PS/2, PCI, ISA, MINI PCI, 24 bit GPIO, FDD, LAN, LPT, and 8 (yes 8) RS232 PORTSCASE: "Bartons Old Fashioned Peppermint...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday