Close

513 Results for "kicad"

  • Big Dipper PCB Art
  • Details     from Big Dipper PCB Art
  • 1. KiCad project The first step was to create a schematic in KiCad to have a picture of how all the components should be connected: button battery, resistors, LEDs, switch and phototransistor. 2. Vector project of the design Then I had to design the...

  • Haunted Keyboard
  • Details     from Haunted Keyboard
  • Have spooky conversations with ethereal AI through this magical keyboard. This custom PCB keyboard is powered by a Raspberry Pi Pico W and connects to any computer via USB. The Pi Pico W connects to WiFi in order to send keyboard input to ChatGPT, which...

  • Player One Continue?
  • Details     from Player One Continue?
  • System is comprised of four flame effect units (propane accumulators), two wireless receivers, and a joystick transmitter.   Xbees are configured for pin mirroring (DIO), so the transmitter is really nothing more than an xbee, two double a's,...

  • isoUSBRS422
  • Details     from isoUSBRS422
  • My first open source, first KiCad project! In addition to source files, 6 video tutorials with total run time 1.5 hours are available to makers who want to make his/her own copy.Details are given in the project webpage:http://www.alperyazar.com/r/isoUSBRS422v1...

  • Tiny Says
  • Details     from Tiny Says
  • The final model should be a 50mm x 50mm (or smaller) Simon Says game based on the ATtiny85 that can be used as a key chain. The plan is to have a rechargeable 500mAh LiPo battery with integrated LiPo charger and USB that can also be used to upload code...

  • Eagle HackChat
  • Details     from Eagle HackChat
  • Join us in the Hacker Channel to talk about Eagle, a schematic and board level design software.This 30 minute session will be about some of the new stuff that's coming up and is a place to make suggestions to current features, air complaints and add...

  • FTController
  • Details     from FTController
  • Features: Two analog joysticks with button4 H-Bridge analog outputs (8-bit) and a open collector outputOverload and Voltage reversal protection7 - 16V Voltage inputAbility to monitor input voltage and motor current, additionally MCU voltageBased around...

  • USB Micro-B to B Adapter Board
  • Details     from USB Micro-B to B Adapter Board
  • All project files are at https://gitlab.com/salfter/arduino-micro-usb-mod: KiCad schematic and board layout, BOM, and Gerbers.  combined.zip contains pre-panelized Gerbers 30-up.  Even with the castellated holes driving up the cost a bit, 150...

  • QRP Transciever
  • Details     from QRP Transciever
  • Requirements Operate on at least 80M band at least CW operation, Ideally i would have some kind of modular approach to adding modulators / de-modulators. keep this an Open Source Hardware project,, I would like to make this as a resource for other beginners...

  • SimpleUI-Logger
  • Details     from SimpleUI-Logger
  • Currently not fully tested, but works by slowly varying voltage and current. Might develop a new version to reduce cost. Known design failures and modifications:1.  Remove R35, since it introduces leakage current in 5mA range2. Add 1uF 0603 MLCC...

  • NBIoT Wing
  • Details     from NBIoT Wing
  • This is a Feather "Wing" which can be added to any feather board. It works by sending AT commands over the RX/TX pins that are on D0/D1 of the feather board. The NBIoT wing also has an optional USB port that allows it to be used as a stand-alone serial...

  • CH55xG Tiny
  • Details     from CH55xG Tiny
  • About This Board Breaks out all IOs within a compact size (2.5x1.6cm) Breadboard-friendly pitch One-sided components arrangement simplifies surface mounting The layout files are available in KiCAD format at linked Github repository. Developing with Arduino-like...

  • Livewell bait timer
  • Details     from Livewell bait timer
  • I was afraid about timing because there are big potentiometers (1M and 2M5 plus 1000uF codenser) but everything works fine. I can adjust duty cicle 0 - 15 minutes and idle 2-30 minutes. Tools used are Kicad (schematic and PCB) amnd CorelDraw (front...

  • Remake VIDEO-MPF-I
  • Details     from Remake VIDEO-MPF-I
  • There are two schema's attached, the actual build and tested one, which required some patching. Another has the flaws corrected, but it is not produced, build and tested. KiCAD files for both are on the Github page.For the MPF-IPlus support as TV-interface,...

  • NFC Music Box
  • Details     from NFC Music Box
  • Stops along the way:* Android Intents* Automate app* NXP Tagwriter app* Investigating Espruino(espruino.com)* Depreciated Spotify API* Spotify API* Librespot Spotify Connect* (Unofficial) TIDAL APIs* International Standard Recording Code* Music Player...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday