Close

24373 Results for "㈎ 뉴원더풀포커 ㉦ rgg799.top ㄽ 게이밍 노트 북 ㆊ 윌리엄힐사이트 ㉬ 온라인포커룸 ㅙ 고스돕홈페이지 ㄿ 리얼머니바둑이 ㆀ 빅뱅게임 ㉮ 백두산맞고"

  • Garage Remote
  • Details     from Garage Remote
  • I used my food sealer. I had to make a few cuts. I stared by sealing the bag sideways to the length of the remote. Then I slid it in sideways and sealed the top.You will need a food sealer which can seal without pulling vacuum or interrupt the vacuum.For...

  • DIY an Earthquake Alarm at Home
  • Details     from DIY an Earthquake Alarm at Home
  • ➢Step descriptions: ✦Step 1:-Wire through the ball, knotted ✦Step 2:- Apply glue to the top of the stick and the middle part. Put two pieces of wood blocks on it. ✦Step 3:- Install a round hoop on the top of the two wood blocks. ✦Step 4:-Wire...

  • GIANT TESLA COIL!!
  • Details     from GIANT TESLA COIL!!
  • The tesla coil consists of a large capacitor bank that holds up to 200kv that is charged with a 6kv neon sign transformer. After the capacitor charges it jumps a spark gap and connects the primary tank circuit. 200,000 volts are pulsed through a primary...

  • Hiking Pole Yagi Antenna
  • Details     from Hiking Pole Yagi Antenna
  • Note:  The diameter sizing for each mount was based off my pair of Leki hiking poles. For reference:Top Mount measured = 16mm Middle Mount  measured= 14mm measured Bottom Mount  measured= 12mm

  • 3D Printed "Tensegrity" Model
  • Details     from 3D Printed "Tensegrity" Model
  • Parts.I 3D printed all parts at .15mm layer height with 100% infill. I printed one "Base.stl", three "Chain (Long).stl", one "Chain (Short).stl", two "Pin (Long).stl", six "Pin (Short).stl" and one "Top.stl". This model is a precision print due to the...

  • Pong in AVR
  • Details     from Pong in AVR
  • Single Player PONG GamePlayer Paddle controlled by two buttonsComputer Paddle controlled by an algorithm to chase the ball wherever it goesThe ball changes X and Y direction when it collides with the top, bottom, or either of the paddlesGAME OVER if...

  • ATtiny10 Christmas Tree
  • Details     from ATtiny10 Christmas Tree
  • This is Version 2 which now has 5 modes and has improved PCB from Oshpark. I've now made 12 of them and since Christmas they are still working great. They sleep at about .09uA!! You press the Reset to wake up which also puts it in the next mode. The...

  • diy shower
  • Details     from diy shower
  • this project do not have details it's just simpleStuff includes1. Bottle2. Pipe3. Cutter4. Aluminium wire5. Tap cover6. Screw 1steps need to follow1. put some holes in the bottle using a screw by heating the screw than insert in the bottle2. put the...

  • PT Cruiser shift bushing
  • Details     from PT Cruiser shift bushing
  • Print settings Print in TPU.  These need to be a little flexible to be pushed in the collar, and the top actually snaps onto the shaft. 1.2-1.6 mm top/bottom/walls. 25-33% grid or line infill.  The sparse infill here helps the part be compliant...

  • TTL Operation Module (TOM-1)
  • Details     from TTL Operation Module (TOM-1)
  • TOM-1 is a TTL-based processor with a small instruction set. The idea came from reading about projects like Gigatron and Ben Eater's 8-bit video series, as well as Verilog CPU implementations like nybbleForth. The design goal is to minimize chip count...

  • MorseMate
  • Details     from MorseMate
  • System Overview The system is composed of three main components: the physical MorseMate device, the MorseMate webpage, and a central server to handle communication between all connected users.   The MorseMate device provides the ability to...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday