Close

773 Results for "%E3%80%8A %EC%98%88%EC%95%BD%EB%AC%B8%EC%9D%98 OIO%E2%86%978489%E2%86%978306%E3%80%8B%EA%B0%80%EB%9D%BC%EC%98%A4%EC%BC%80%E3%85%92%EC%B2%AD%EB%8B%B4%EA%B0%80%EB%9D%BC%EC%98%A4%EC%BC%80sweep%E3%81%94%EA%B0%95%EB%82%A8%EA%B0%80%EB%9D%BC%EC%98%A4%EC%BC%80%EC%84%A0%EB%A6%89%EA%B0%80%EB%9D%BC%EC%98%A4%EC%BC%80%EC%B2%AD%EB%8B%B4%EA%B0%80%EB%9D%BC%EC%98%A4%EC%BC%80conviction %EA%B0%80%EB%9D%BC%EC%98%A4%EC%BC%80%E3%88%9B%EC%84%A0%EB%A6%89%EA%B0%80%EB%9D%BC%EC%98%A4%EC%BC%80%E3%8E%B9%E3%84%BB%EA%B0%80%EB%9D%BC%EC%98%A4%EC%BC%80%EC%B6%94%EC%B2%9Ccab"

  • DC Home Lighting
  • Details     from DC Home Lighting
  • DC LED Lighting SystemThis project will concentrate on developing a DC LED lighting system that can be retrofitted into existing home wiring systems. Goals of this system are to:Reduce the load from lighting to minimize the solar panels and battery capacity...

  • Arducard
  • Details     from Arducard
  • Features ATmega32U4 (Same as the Arduino Leonardo)USB transceiverDS1343 Real-Time Clock128KB FRAMLiR2016 Coin-cell Li-Ion batteryBattery charging over USB2.7" e-Paper display5 edge-mounted interrupt-triggered tactile buttons Dimensions 80 mm x 45 mm...

  • TRS-80 Model 1 on a PIC32
  • Details     from TRS-80 Model 1 on a PIC32
  • I did this project to keep myself occupied while recovering from some surgery in 2015, for which I would have limited mobility for about a month. I didn't think I'd be up to doing bench work, so I used some existing PCBs to allow me to focus on the firmware,...

  • 2020 Al Extrusion Erector Set
  • Details     from 2020 Al Extrusion Erector Set
  • 2020 AL Extrusion Erector set is a modular collection of printable brackets and parts that allow anyone with a 3D printer and 2020 AL extrusion to build just about any rigid structure they want.Being open source and freely available allows anyone with...

  • Rowdy Pix
  • Details     from Rowdy Pix
  • Prototype:Raspberry Pi Zero WPS3 EYE for mic and camera ( can use what ever you want)Python skill: PyAudio, audioo, pygameAverage room noise is calculated by capturing the rms with audioo.If a new rms value is greater than the average rms by a percentage...

  • OnoESC 32-bit 30A ESC
  • Details     from OnoESC 32-bit 30A ESC
  • Current specs:Atmel ARM M0+ 48MHz microcontroller (ATSAMD21G18A-AU)30 amps continous, >80 amps peak (TPN3R704PLL1QCT-ND) (probably over-kill)Proper bridge drivers (LM5109BSD/NOPB) (may switch)2 to 3S (6.6V to 12.6V)Current monitoring (with the ACS711KEXLT-31AB-T)Various...

  • STEbus SCSI
  • Details     from STEbus SCSI
  • I wondered if I could use these boards as hard drive controllers, instead of having to invent an IDE controller. A quick look at eBay.co.uk showed that although some drives were cheap, they were the dodgier looking ones. For the others, it was hard to...

  • Simple Shower Fix
  • Details     from Simple Shower Fix
  • I knew the manufacturer could post me a replacement but I wanted a part quickly as my shower was out of action. Looking at the design of the original part it had a countersunk hole but the screw was a pan head. The plastic was also quite thin at the...

  • OpenTorque Actuator
  • Details     from OpenTorque Actuator
  • Specs: Peak torque (theoretical): 80 NmWeight: 1150 gGear ratio: 8:1Cooling: Passively cooled, active air-cooled version in the worksCost: ~$150License: Creative Commons Attribution - ShareAlike 4.0 International Public License OpenTorque is being used...

  • Emergency Exit Coffee Table
  • Details     from Emergency Exit Coffee Table
  • Old ikea tables where cut in half for becoming the side walls and got screwed together. The glas plates on top and bottom are 1 cm in height and were produced for those exact randomly occurring dimensions (80 x 44.5 cm). Some old LED sealing lamp was...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday