Close

24373 Results for "《 예약문의 OIO≡⑧④89≡83O⑥》강남하이킥레깅스룸Χぬscheme하이킥레깅스룸⊂선릉하이킥강남하이킥레깅스룸⑪も강남하이킥they 강남하이킥레깅스룸㈌선릉하이킥ㅼぷpoor"

  • The Open Source Autarkic Motherboard
  • Details     from The Open Source Autarkic Motherboard
  • 3-11-2024 See these two 2011 Liliputing and TechCrunch articles, which were partly the inspiration for this project:  https://liliputing.com/pixel-qi-suggests-low-power-tablets-could-be-powered-by-1w-solar-panels/(6-3-11) https://techcrunch.com/2011/06/04/first-solar-powered-laptop/ (6-4-11)...

  • soul light
  • Details     from soul light
  • I want to make a light which consule less but should bright so that poor children should be able to read in that light

  • Automajick Cat Toy
  • Details     from Automajick Cat Toy
  • https://hackaday.com/2017/12/16/poor-mans-laser-scanner-probably-wont-shoot-your-eye-out-kid/Something similar with a significantly safer laser. :) 

  • Poor Man's Polaroid
  • Details     from Poor Man's Polaroid
  • The project was inspired by Mitxela's https://hackaday.com/2018/04/16/polaroid-gets-thermal-printer-and-raspberry-pi/ Extended details and steps can be found on my GitHub page: https://github.com/kami4ka/Poor-Man-s-PolaroidLink to 3D model: https://a360.co/2s8DhJL...

  • Truck Bedcover
  • Details     from Truck Bedcover
  • I plan on using a technique referred to as poor mans fiberglass to create the shell over shaped and bonded foam shell to create a bonded weather tight shell to direct the flow of air over the bed of my truck. doing this should prevent de-lamination (cavitation)...

  • Raspberry Pi 3B bot
  • Details     from Raspberry Pi 3B bot
  • update 01/03/18 i have wired the motors and designed and printed the chassis i still need help with my HAT for the Pi need a friend to help me with the soldering because my soldering skills are poor  Motor test youtube Motor and Chassis Test RPI3B...

  • Still Run (temple run controller)
  • Details     from Still Run (temple run controller)
  • we wanted to create an innovative and sporty way to play Temple Run by running with the poor guy in the game. To make the character jump you'll have to actually jump ! Slide down, go left, go right, collect coins and rush through the level with a power-up...

  • Open Indirect Ophthalmoscope
  • Details     from Open Indirect Ophthalmoscope
  • OverviewCurrently there are over 422 million people worldwide suffering from diabetes. 28.5% of them suffer from Diabetic Retinopathy(1) . 50% of diabetics are unaware about the risk of losing their vision(2). The number of cases of diabetic retinopathy...

  • Alcohol sensor
  • Details     from Alcohol sensor
  • Its more like a fun project, than an actually useful one, because the MQ3 sensor is quite poor in the terms of sensing the blood alcohol. My friends and i have done some testings with it at a bar, and it was capable of measuring our alcohol consumption,...

  • Picoammeter
  • Details     from Picoammeter
  • PLEASE NOTE : there is an oversight in my PCB design : DDC112 digital pins are 5V, and the TinyFPGA are 3.3V and are NOT 5V tolerant (it's a bit not clear on the internet, but the ICE40LP8K specs don't mention 5V anywhere). I'm just lucky my poor TinyFPGA...

  • REC 74LS922 : 16 Keys Encoder
  • Details     from REC 74LS922 : 16 Keys Encoder
  •   The MM74C922 is a 16-key encoder that I've been using in my Arduino project, but now it's getting more and more expensive (because it's getting discontinued). for instead it,usually uses software keybord scanning. but i'm poor at programming,...

  • LM317T application circuit
  • Details     from LM317T application circuit
  • tage is often increased due to poor contact of the potentiometer and the load is burnt. If you add a transistor (as shown in the figure below), under normal circumstances, the base potential of T1 is 0, and T1 is cut off, which has no effect on the circuit;...

  • Garage CNC Workshop
  • Details     from Garage CNC Workshop
  • Sound Dampening PanelsSound is an issue with any workshop, power tools are cool but make lots of noise. My workshop has the added benefits of being in a garage, close to neighbors and harboring a CNC table. My primary concerns are the air compressor,...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday