Close

24373 Results for "㈎ 뉴원더풀포커 ㉦ rgg799.top ㄽ 게이밍 노트 북 ㆊ 윌리엄힐사이트 ㉬ 온라인포커룸 ㅙ 고스돕홈페이지 ㄿ 리얼머니바둑이 ㆀ 빅뱅게임 ㉮ 백두산맞고"

  • Data-To-SD

  • No components needed to solder on (Except the wires you solder on the pins) Has 2 layers needed to be printed (Top & Bottem)
  • DDC-01

  • IntroductionFair WarningFrom the Top Down - 1From the Top Down - 2
  • DuoDeck Type

  • Built into this device are the following: - Two fans, toggled via switch on top - Direct access to Arduino prototyping pins, exposed at the top of the shell - USB expansion with toggle switches - A cigarette lighter port, matching...
  • Pomodorino

  • The device uses a ATTiny85 with a V-USB Bootloader that is Arduino compatible. Basically it is just a DigiSpark with an WS2812 LED strapped on top
  • LightCube

  • To do:   Create new case that can accept 4 pieces of acrylic.  Top, front, left and right.Addressable LED's for all 4 sides 
  • Mondrian Inspired Work Table

  • After a search & rescue for the rogue scrap pieces hiding, we tossed them in a pile on the floor and started our game of analog Tetris.We decided to use an IKEA Expedit as the base which is about 15.5" x 60" and give it a roughly 36" x 60" top. I had...
  • Water temperature mk2

  • The core of the probe is three 4xAA battery holders glued together. The top one have no battery connectors left but instead are used to attach the Feather and sensor. The two bottom battery holders are wired in parallel to the battery-port of the Feather.At...
  • Air Pressure Quadcopter

  • This unique Quadcopter idea goes like this..Top Duct Air intake (Intake vents on top, Remote Control Module inside)Remote Control Module (Controls all motors and motor speeds inside unit)Fan 1 (Moving at high speed drawing air into the unit)Top Motion...