Tiny:bit microbit robotis a robotic car for the micro:bit education market. It is compact, easy to assemble, and easy to move in tight spaces. The Tiny:bit smart car is based on the micro:bit development board design and uses the online...
Function introduction (1) The power supply of the smart car is a 7.4V lithium battery, and the anti-reverse connection design is well done; (2) On-board power check circuit to realize low voltage alarm function; (3) The RZ7899 is used to drive...
Background Some time ago I put a JVC KD-X342BT into Renault Clio II, originally equipped with Update List radio device. This car is equipped with a stalk remote control, placed next to ignition switch. Also, mentioned JVC radio has a single, blue-yellow...
Few months ago the great folks at Elegoo sent me a beautiful Robot Kit Version 1.0. I already posted Assembly Instructions, and some tutorials on programming it. Since then Elegoo introduced a newer and simpler to assemble 2.0 version, and the Elegoo...
The Arduino Bluetooth Smart Car has the function of Complete tracking, obstacle avoidance, infrared remote control and Bluetooth remote control. It is a MCU study and application development system base on Atmege328.The greatest feature is that you can...
The SM2 Arduino Robot KIT is Manufactured and distributed by Kiman . They sent me the KIT so I can add support for it in Visuino - a graphical development environment for Arduino. I have already assembled the Robot, and now I am experimenting with...
At the moment i have one problem. Since tablet is very smart, it can track how much power does on-board battery charger put into battery, and how it used, it can calculate that it is running out of power. Problem is i have constant 2A CCCV power supply...
Introduction: RC Car (Arduino Project) In this project I will show you how to build a simpler version of RC cars. I’m providing a full step-by-step guidance to show you how to make your own RC car, and I'm explaining in details both hardware and software...
The Challenge/Problem So the problem was I’d previously started a small robot car build using one of the cheep 4WD chassis available on Banggood with my youngest daughter. I got a couple of dual motor drivers from Sparkfun and Particle photon I already...
Hi everyone, today I am going to unbox and assemble the Crowbot Bolt an open source programmable Smart Robot Car. CrowBot BOLT is an open source smart programming car powered by ESP32 chip. It has a wealth of sensors (such as a light sensor, ultrasonic...
The Data is pulled from the API via a node-red node gets "filtered" and passed on to Grafana and MQTT. So it is possible to view historic data in Grafana:But the most useful Information is the SoC which is displayed on some pages of my smart...
At the beginning of the new year, robot/Smart Car hobbyists and students (like all of you) about engineering, science and technology are busy with preparing for the robot competitions now. It's the great time to show the world your imagination and potential...
I am using an electric Smart Car motor/controller and charger, as well as some big relays, safety cut offs, crash switch and the water pump from the same era electric Smart Cars. I think there is great potential for the use of OEM parts in electric conversions....
Feb 18, 17: found an accesible CAN Bus, type and it's data rate. In the Instrument Cluster there is an NXP TJA1041 transceiver, pulled HI and LO wires following datasheet's pin out. Two options that I have available to receive CAN messages are a Beaglebone...
TKIRV (TK Internet Remote Vehicle) is a project I've wanted to do for a long time now. The idea is first and foremost to build a remote control car that can be controlled over the mobile network. Throw together a webcam and a Raspberry Pi and we should...