Close

352 Results for "air quality"

  • Using CanAirIO app
  • Instructions     from CanAir.io Air Quality Network
  • Usage For now you need any Android device with Bluetooth 4 or above. You can download the CanAirIO app from GooglePlay, keep in mind that it is in continuos development then please any feedback, report errors, or any thing please let us knowed it via...

  • Build the air hose
  • Instructions     from Measuring HRV and other HVAC devices
  • I made some air hoses.  This was fun!  I started with the 4 mm hose barb on the sensor, so found some 4 mm ID, 6 mm OD air hose on amazon. Uxcell a13080200ux0301 Blue 9M 29.5Ft 6mm OD 4mm ID Polyurethane PU Air Hose Pipe Tube The HRV has little...

  • Instructions for build
  • Instructions     from Device for Seismic Noise Analysis
  • This picture is of my "indoor" seismometer, with its electronics in an antique wooden box next to it. It is networked and completely functional, but because of its noisy indoor location, it is not useful for any serious seismology. It is never quiet,...

  • Hot Air Exhaust
  • Instructions     from Nibbler Table Saw
  • The simplest of changes was to add a hot air exhaust port and duct. I chose Chardonnay because its oaky tones complemented the oak in the top.  You can choose a nice red, just NOT MERLOT! This may look large, but I wanted to make plenty of room...

  • AdvancePetPot
  • Instructions     from Pet Pot
  • Follow the same above instructions for setting the Mind+ software.Drag and drop the AdvancePetPot folder into unihikers directory.Follow this tutorial for Setting Up The SSH For Unihiker.After you setup the SSH follow the below steps. Connect Unihiker...

  • Cut the fan air inlet
  • Instructions     from Vortex barrel incinerator
  • Cut the fan air inlet tube off near the end, at a steep angle.. again about 30 degrees off from the length.   Place the cut part against the side of your upper barrel and mark it. Cut out the hole.  Make sure you are rotating the air in...

  • IRK! Infrared Remote USB Keyboard
  • Instructions     from IRK! Infrared Remote USB Keyboard
  • Through Hole Technology (THT) versionThis is how I built the Through Hole Technology version Make a double-sided fibre glass PCB (see front- and back- PDF files below). There are several ways to do this. The way I do it is to print the front and back...

  • Fan-Air Puppet Shaped Foam Interface
  • Instructions     from Soft Robotics Ducted Dancer
  • The base of the air puppet legs have to be flared and fairly wide to keep it from constantly falling over. I epoxied and taped hard pieces of foam to the front and back of each fan array. The shape and circumference of the combined foam-fan platform...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday