Screw the hex standoffs into the Raspberry Pi and position it on the lid. You may need to file a notch in the lip of the lid for the SD card so it doesn't get snapped off. Mix some two-part epoxy and put a blob on the bottom of each standoff, press the...
Obtain a Raspberry Pi OS image (lite version recommended) and follow the instructions to burn the image to a microSD card. Open the new /boot partition of the SD card on your computer and edit the config.txt file, adding the following lines at the end...
Getting puredata on the raspberry piThe easiest way that I've found is to download one of the image files from the pd-la group. Their image files have puredata and all the required dependencies pre-installed, simply follow their instructions to copy...
First solder the headers onto your Arduino Nano board. Notice that I soldered the ICSP header onto the bottom since I'm using it to solder the serial lines of the LCD to.If your joystick and SD card breakout boards come with angled headers, like mine...
Screw the spacer onto the SD card board.Solder the Arduino and SD card breakout onto the perfboard. Notice their placement in the image. Solder the VCC (5v) and GND lines of the SD breakout board to the NanoComplete the data lines of the SD board:CS...
This is a tutorial on how you can build your very own Raspberry Pi Tor Router. The process has been modified (not a lot, the end result will be the same) to make the build experience easier for the user.Firstly, gather your materials. You will need the...
Install a Linux distribution on your Raspberry Pi Install Ubuntu MATE (here's the useful link for that: https://ubuntu-mate.org/raspberry-pi/), or Raspbian (eXaDrums works best with Xfce). If you want Xfce, download and install Raspbian Jessie Lite,...
Mechanical modificationFirst we start to modify plastic casing of furby. It is necessary because we need some space for new OLED displays as eyes. We have to cut out the both side of furby. The holes were needed in the first version of mounting OLED...
Open FURBY uC controller The original Furby controller from Hasbro we changed with our own. Now we can manipulate with different elements of Open FURBY and read values from sensors. Open Furby driver contains:uC NXP Kinetis K40 (MK40DN512VLK10) with...
Use any partitioning tool to create two partitions in the SD card. The first partition must be FAT type and its size of at least 16 MB. The second partition must be EXT3 type and its size of at least 3 GB. Example (supposing 'sdd' was asigned as the...
Now we need to prepare the SD card (I have been working on a Windows 7 based PC). Download and unzip SD card image https://www.supla.org/download/rbpiext01.zipInsert the SD card into your computer’s card reader.Using Administrator account run the DiskImager...
From here we could follow instructions over @LearnAdafruit or keep reading here.Download THIS new Kernel. Thanks to @adafruit @AdafruitIndustries @limorMove the kernel file to the boot directory of your "Jessie" SD card.Insert SD Card in the Pi Zero...