Arduino Mega 2560 x 1pc CNC shield x 1pc Power supply PCB x 1pc SD card module x 1pc Stepper motor (traverse) x 2pcs Gear (for belt) x 2pcs Stepper motor (pen) x 1pc Belt x 2pcs Base x 1set Bolt, nuts (various) SoftwareArduino IDE/ Corel draw/ Microsoft...
On the raspberry pi, you may need to affix the battery pack to the pi. I recommend a rubber belt (of the variety used in small vacuum cleaners); however, several rubber bands will do.I recommend taking some foam and cutting a rectangular hole slightly...
The Arduino was programmed to cycle through the sound files on the SD card mounted on the SOMO-14D. Each time a file is selected, a pulse was sent to the EL sequencer to coordinate the "light show effect". The Arduino also monitored the switch cct status...
Go to the Raspberry Download Page and download N.O.O.B.S. Follow the documentation to install N.O.O.B.S on your SD Card. When it's done plug it into your Raspberry Pi, power it up and choose your Operating System to install.For the rest of the instructions,...
### [ WRITE IMAGE TO SD ]wget "http://93.174.101.10/bt/09bc05ab03780f279390e9cf6a15c7c249f712e1/data/2014-01-07-wheezy-raspbian.zip"7z x 2014-01-07-wheezy-raspbian.zipSD_CARD=/dev/sdX # Change it to your SD card device namemd5sum 2014-01-07-wheezy-raspbian.img...
Warning: hacker construction projectIf you are interested in making something like this, be warned. This project is a total hack job and will not run on any out-of-the-box hardware I am aware of. Development boards are available, but would require modification...
Tickernut circuit design and hardware:Enclosure:The motherboard is shaped to fit tightly inside a standard ABS jiffy box which set its limited size. The box has cutouts to expose all motherboard connectors on the left side and a small speaker and antenna...
Tickernut firmware:Ethernut is an Open Source Hardware and Software Project for building tiny Embedded Ethernet Devices. It consists of a set of hardware designs all running an open source operating system called Nut/OS and a TCP/IP protocol suite named...
Tickernut construction log:Construction was completed in stages over the period of many months with a design that evolved to suit the available parts. The progression of construction was arranged so that each stage could be completed and tested...
Download my Arch Linux Wireless Raspberry Pi image: archwipi.img.tar.gz (252MB)Extract it. eg: sudo tar zxf archwipi.img.tar.gzWrite the extracted image to your SD card. eg: sudo dd if=archwipi.img of=/dev/sdb …change sdb if necessary. Don’t run this...
Step 5: Setting up the voice recognition software for your DIY head mounted display Different screenshots from the head mounted displayI have prepared an interactive voice response system that responds to certain voice commands and gives you appropriate...
Install and setup Raspbian on your Raspberry Pi http://downloads.raspberrypi.org/raspbian_latest.t...Insert your SD Card, plug in a monitor/keyboard, and boot up
Download the thingbox.io image to the sd-card and boot the Pi. If you're using a direct connection you'll have to enable SPI and install the drivers - instructions here.