Close

3995 Results for "《 예약문의 OIO≡⑧④89≡83O⑥》레깅스룸견적よ레깅스룸ago레깅스룸メ강남레깅스룸eighty 선릉레깅스룸κ선릉레깅스⒲레깅스룸メｃ선릉레깅스룸literary"

  • The Dune Pain Box
  • Instructions     from The Dune Pain Box
  • To get a good idea how we made the electrodes, you can read the project update entitled "The Hand Thingie".  If you want to use the same sensing set up we used, this worked well.  Any sort of Object that is fairly ergonomic and can have the...

  • Animatronic AVP Predator cannon

  • Instructions     from Animatronic AVP Predator cannon
  • Cannon code- #include "Servo.h" // include the servo library Servo armServo; // servo to raise the arm Servo cannonServo; // servo to recoil cannon // these constants won't change: const int triggerSensor = 1; // the sensor is connected to analog pin...

  • Make and Feel Virtual Drawings
  • Instructions     from Make and Feel Virtual Drawings
  • Make Processing control Arduino THE FINAL PROGRAM:So,you have started drawing on Processing. Now, you'll 'feel' the drawing!Imagine you are blind (remember, this device was invented for blind people to draw on computers):How would you feel a raised line...

  • Make and Feel Virtual Drawings
  • Instructions     from Make and Feel Virtual Drawings
  • Hack a mouse (optional) Open the casing of the mouse, and remove the scroll roller.Now, you should have space to place the servo motor like in the picture.To paste servo motor on the mouse board, use a glue gun or double sided tape.Now, there should...

  • Jewel Box Servo Meter
  • Instructions     from Jewel Box Servo Meter
  • Test fit all the components in the box to find the best arrangement. Cut a piece of strip board 8 rows wide and up to about 25mm long that will fit flat on the floor of the box. The strip board will act as a bus to connect to the header. I placed the...

  • IRK! Infrared Remote USB Keyboard
  • Instructions     from IRK! Infrared Remote USB Keyboard
  • Through Hole Technology (THT) versionThis is how I built the Through Hole Technology version Make a double-sided fibre glass PCB (see front- and back- PDF files below). There are several ways to do this. The way I do it is to print the front and back...

  • Trombino
  • Instructions     from Trombino
  • For the wind version... Solder parts for the button board onto a small piece of stripboard. The schematic for the layout can be found in the Fritzing file on the projects github repository. Cover the back and sharp edges with Sugru.

  • Trombino
  • Instructions     from Trombino
  • Use some more epoxy to affix the button board above the handle.

  • Trombino
  • Instructions     from Trombino
  • Solder on the parts for the second part of the strip board and affix it in the lid of the box.

  • 650nm 5mw Laser Build
  • Instructions     from 650nm 5mw Laser Build
  • After some scrounging around I found a cheap axis laser housing with diode and driver board still intact! For me, this is a mirracle as most of the time, I usually disassemble things when I first get them.After I scrounged up the rest of the parts I...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday