3 Results for "bar robot"

Cut the mild steel bars to form 13 lengths of 87mm bars and use a dremel or similar to smooth the ends slightly (shown below are 87mm bars, but only 9 of them). Also cut the 1 metre smooth steel bar to get 3 sections of 325mm bar and smooth the ends...

I started by cutting all the lengths of steel box section to length according to the chassis design. Next i made the hydraulic wheel motor mounting plates. I used a compass and pencil to mark up for the large holes that took the body of the hydraulic...

CADed parts are an ideal representation of the design you have in your head. CAD sets the bar. You just have to reach it. 3D printed parts usually come out a bit off and require a some modification if you are not generous with your design tolerances. How...