890 Results for "『 모든문의 OIO=5793=7458 』 선릉셔츠룸㈄『 모든문의 OIO=5793=7458 』 Ηcake²셔츠룸테란강남셔츠룸デwriter 셔츠룸테란강남셔츠룸 선릉셔츠룸⒁셔츠룸사이즈┲exhausted⅔"

µBob biped robot
Instructions from µBob biped robot
For the body frame, bend some paper clips and solder them into the holes in the corners of the PCB:

µBob biped robot
Instructions from µBob biped robot
You can add a hat, a mustache, some wire hands, perhaps a pipe or a monocle, etc. The battery is attached to the frame with some two-sided tape.

USB Caliper HID
Instructions from USB Caliper HID
//--------------------------------------------------------------------- // USB Caliper HID // // version 0.1 - incomplete, only caliper read and output to USB // structure in place. Enough to read from Caliper // and output it. //---------------------------------------------------------------------...

Arduino driving a Parallax Boe-Bot
Instructions from Arduino driving a Parallax Boe-Bot
attach the servo's to the chassie and feed the servo wires through the slots at the back of the frame.

Arduino driving a Parallax Boe-Bot
Instructions from Arduino driving a Parallax Boe-Bot
Using standoffs mount the arduino to the frame. My Arduino was in a holder but you can mount the Arduino directly to the frame if you dont have the holder.

Arduino driving a Parallax Boe-Bot
Instructions from Arduino driving a Parallax Boe-Bot
I added my battery box 4xAA under the Arduino frame. You can do whatever works for your power source. 9v Batter or a USB battery extender will work as well. Its a little tight but I used a rubber band around the frame to pull it down and level.

Dollarstore lens find = Big screen Cardboard
Instructions from Dollarstore lens find = Big screen Cardboard
Tip: Use heat on bridge of frame and stretch to adjust distance between lenses to match your phone exactly.

Arduino openHAB Garage Door Control
Instructions from Arduino openHAB Garage Door Control
Install to GarageOnce you've gotten your controller functioning the way you like, move it to the garage. This is where the YUN is very handy. With the WiFi, you will still be able to modify your code, test, and operate without a direct connection to...

Xerox Phaser 3117 modified to print PCB
Instructions from Xerox Phaser 3117 modified to print PCB
Now we can remove the back of the printer allowing the free access to the paper path frame.

VU-meter Esp8266 - WS2812B
Instructions from VU-meter Esp8266 - WS2812B
Udate WS2812B, the HSVtoHex is from the top routine made by cnlohr ( the base for this hack )// https://github.com/cnlohr/ws2812esp8266/blob/master/user/user_main.c static void ICACHE_FLASH_ATTR procTask(os_event_t *events) { int i=0; uint32_t hex; //...

Briefcase PC
Instructions from Briefcase PC
Mount the LCD.NOTE: I would highly recommend getting something different than what I have and make sure it is VESA mountable. You can then simply drill holes in the locations of the VESA holes on the monitor and use some Aluminum Rectangular Bar and...

Briefcase PC
Instructions from Briefcase PC
Mount the PSU. I had to cut the PSU case open and snip some wires to make it fit how I wanted. My friend didn't and put his in whole and just cut a hole in the side of his case for the power. I wanted only a single power run for both the monitor and...

Drone Test Stand
Instructions from Drone Test Stand
Assemble the FrameA) Cut the Frame PiecesB) Put the Joists togetherC) Tilt the main joists on it's side and attach the first two legsD) Tilt the frame back up and attach the two legsE) Repeat the Process for the other halfF) If your vehicle is large...

WRONG PROJECT 2
Instructions from WRONG PROJECT 2
Step 1. Functionalization and Dispersion of iMWCNTSo you have recieved some cheap 90% clean multi walled carbon nanotubes. That's great but they are pretty useless as is, the first order of business is to clean and functionalize them using nitric acid...

Featherjib
Instructions from Featherjib
Alternately, if you don't already have a tripod to disassemble, you might consider another option for mounting your camera to the Shur-Line pole. Home Depot also sells a Project Select Adjustable Pro Yoke Roller Frame, which expands to hold rollers between...

|<
<
3
4
5
6
7
>
>|