269 Results for "air quality"

Using CanAirIO app
Instructions from CanAir.io Air Quality Network
Usage For now you need any Android device with Bluetooth 4 or above. You can download the CanAirIO app from GooglePlay, keep in mind that it is in continuos development then please any feedback, report errors, or any thing please let us knowed it via...

Final System Implementation
Instructions from LoRa Powered Air Quality Monitoring System
We will now proceed to putting everything together. That is, connecting the sensors to the nodes, setting up the LoRa Gateway, setting up the software side of the project and then after that we will proceed to setting up the Raspberry Pi Dashboard and...

Build the air hose
Instructions from Measuring HRV and other HVAC devices
I made some air hoses. This was fun! I started with the 4 mm hose barb on the sensor, so found some 4 mm ID, 6 mm OD air hose on amazon. Uxcell a13080200ux0301 Blue 9M 29.5Ft 6mm OD 4mm ID Polyurethane PU Air Hose Pipe Tube The HRV has little...

Instructions for build
Instructions from Device for Seismic Noise Analysis
This picture is of my "indoor" seismometer, with its electronics in an antique wooden box next to it. It is networked and completely functional, but because of its noisy indoor location, it is not useful for any serious seismology. It is never quiet,...

Hot Air Exhaust
Instructions from Nibbler Table Saw
The simplest of changes was to add a hot air exhaust port and duct. I chose Chardonnay because its oaky tones complemented the oak in the top. You can choose a nice red, just NOT MERLOT! This may look large, but I wanted to make plenty of room...

Purchase your air filters
Instructions from PC 140mm Air Filter
Amazon or eBay, it's your choice. Don't bother with the pre-filter.

AdvancePetPot
Instructions from Pet Pot
Follow the same above instructions for setting the Mind+ software.Drag and drop the AdvancePetPot folder into unihikers directory.Follow this tutorial for Setting Up The SSH For Unihiker.After you setup the SSH follow the below steps. Connect Unihiker...

Heat Storage - Place Air Ducts
Instructions from Solar Heated Home with Underground Heat Storage
The bottom of this photo is south, where the sunspace will be built.

OTA Over-the-air Programming
Instructions from IoT Personal NodeMCU ESP12 WiFi Weather Station
OTA (Over the Air) update is the process of loading a new firmware to ESP8266 module using WiFi connection rather than a serial communication. This type of functionality is extremely useful in case of no physical access to the ESP module. Uploading a...

Fan-Air Puppet Shaped Foam Interface
Instructions from Soft Robotics Ducted Dancer
The base of the air puppet legs have to be flared and fairly wide to keep it from constantly falling over. I epoxied and taped hard pieces of foam to the front and back of each fan array. The shape and circumference of the combined foam-fan platform...

Adding the Air Purifier to ESPHome
Instructions from Making an old Air Purifier smart
Add the ESP32 to to your ESPHome and add following lines to the corresponding yaml: (choose your own names and edit the GPIO numbers accordingly) switch: - platform: gpio pin: GPIO18 inverted: no id: relay - platform: template name: "Air_3_fan" turn_on_action:...

Making room under the hood with an air intake reroute
Instructions from DC-DC Solar EV Charger
There is very little spare volume under the hood of a Chevy Volt. Fortunately we can remove the engine cover to create a large open area with several inches of available height. The air intake is routed through the engine cover, so the air intake...

STEP4 WATER & AIR TEMPERATURE SENSOR AND HUMIDITY SENSOR
Instructions from Aquaponics device for education
Finished Building a water&air temperature sensor DS18B20 with 5110 LCD screen. It is based on Arduino and we offer the open code following :/* Author: Danny van den Brande, ArduinoSensors.nl. BlueCore Tech. Hello world! this is a example project...

Assemble Automated Air Vent and Attach the Moisture and Temperature Sensors
Instructions from The Compost Professor - A Smart Composting System
[Note - for some reason, this step always appears as #1, even after I move it. This step labeled "Ready Moisture and Temperature Sensors for Compost Bin"]Materials Needed: Servo and plastic wing3D Files - Servo Wing, Servo Case, Servo BackSmall Screws...

BMP280 / BME280 I²C air pressure, temperature and humidity (BME) sensor.
Instructions from ESP cookbook
Convenient way to add plenty of environmental information with limited number of wires. Four BME280s can deliver four pressure+temperature+humidity sets with six wires (Vcc,Gnd,2x SDA&SCL), while allowing four of those to be shared with other I²C...

|<
<
1
2
3
4
5
>
>|