Close

13109 Results for "《 예약문의 OIO≡⑧④89≡83O⑥》선릉레깅스룸㉹ベgrace레깅스룸S선릉레깅스룸선릉레깅스е я레깅스룸비용superstition 강남레깅스룸′강남레깅스§8fetch"

  • AHT10 Sensor with XIAO Setup

  • The AHT10 Temp and Humidity Sensor Module is being used in this project, and it is a compact and highly accurate sensor designed to measure temperature and humidity in various applications. The module integrates a high-performance AHT10 sensor chip,...
  • PCB DESIGN

  • The next step of this project was to put everything together to create a basic PCB that would contain all of the components we used to create the breadboard version, in addition to a lithium cell with a charge discharge circuit to power the XIAO module,...
  • SEEED FUSION

  • After finalizing the PCB and generating its Gerber data, I sent it to SEEED Studio for samples. The PCB was ordered in a white solder mask with black silkscreen. PCBs were received in a week, and their quality was super good considering the rate, which...
  • PCB ASSEMBLY

  • Using a solder paste dispensing needle, we first add solder paste to each component pad individually to begin the PCB assembly process. In this instance, we are using standard 37/63 solder paste.Next, we pick and place all the SMD components in their...
  • POWER SOURCE

  • The IP5306 Power Management IC is attached to the 3.7V 2600mAh 18650 Li-ion Cell, which serves as the power source. It raises the 3.7V to a stable 5V so that the XIAO MCU, display, and sensor can function. When we insert the cell into its holder and...
  • 3D DESIGN

  • Let's have a look at the design of this TEMP Meter project, which was made in Fusion360. The first holder that we modeled is made up of an upper and a lower holder that are both going to be tightened to the handle of the motorcycle. This holder is attached...
  • FINAL ASSEMBLY

  • Using two M2 screws, we first attach the basic lever component to the TEMP circuit. Two holes have already been created on the PCB for mounting the screws with the lever part.Next, we mount the lever part assembly with the upper holder using two washers...
  • RESULT SO FAR

  • Here's the result so far: The TEMP Meter setup is working pretty well. By pressing the Tacktile switch, the device turns on and remains on for one minute. The IP5306 IC then shuts down and the device turns off; this function is essentially an auto-shutoff...
  • Overall Result

  • This is the culmination of this strange but amusing build: a live temperature and humidity meter attached to the motorcycle handle. Now that we have this meter configured, we can get real-time temperature and humidity readings in any location without...
  • The Concept of Reflow Soldering

  • Reflow soldering is a widely used process in electronics manufacturing for soldering surface-mount components to PCBs. Reflow soldering involves melting solder paste to create a permanent connection between the electrical components and the PCB. The...
  • Existing Hotplate

  • There are already hotplates on the market with more useful features like cutoff features, manual temperature control, strong bodies, etc. Every size of these hotplates is available. A common example of a small hotplate is the Miniware MHP30, whose reflow...