Now that i know how to access and decode the data lets try the Raspi GATTTOOL default BLE handler:Native to Debian and a lso to a bunch of linux distros or so i've heard of . First i reset the bluetooth of the raspi, just in case: sudo service bluetooth...
You will need a Lipo battery with 100mAh capacity, you can get a higher capacity one but take into account that more capacity means a bigger battery so it won't fit into the board, the battery must have a protection circuit included. The battery must...
I wanted to use a BMP280 I had in my parts bin for altitude measurements. I have used it in the past for a simple weather station and it works great! Turns out, it is even the go to sensor for Stratux, so I went ahead and plugged it in, activated it...
Slide the Pi Zero through the PiHolder, with curved tweezers carefully guide the jst connecter and the camera cable through Buttonholder piece and the front bridge piece.
This last step is going to get REALLY tedious because the Address Bus has so many lines. But this is the last step and you should be done, so keep it up just a little longer. A0: 6502 Pin 9 to FLiP pin 13 A1: 6502 Pin 10 to FLiP pin 14 A2: 6502...
Ethereum installation on a Raspberry PIAn Ethereum node running on a Raspberry Pi. Photo by RIeul (CC-BY-NC-SA) Equipment 3 Raspberry Pi with Ethereum client (each Pi = a node of a blockchain) 3 SD cards 2 computers Other solution Using Wio Link to simulate...
Im 100% sure this can be done better but this is what i have now:I am using an "exec node" feeding a "function" node java-ing the bytes to finally end at different "chart nodes" EXEC node executes a bash script:Connects to the sensor, writes to its configuration...