331 Results for "%EC%9D%B8%EC%B2%9C%EC%98%A4%ED%94%BC%EA%B0%95%EC%B6%94%E2%9C%9Awww%2Coptime4.com%EC%9D%B8%EC%B2%9C%EC%98%A4%ED%94%BC%20%EC%9D%B8%EC%B2%9C%EB%A7%88%EC%82%AC%EC%A7%80%20%E2%9C%9A%20%EC%9D%B8%EC%B2%9C%EC%98%A4%ED%94%BC%E1%98%9B%20%EC%9D%B8%EC%B2%9C%EC%98%A4%ED%94%BC%EC%82%AC%EC%A7%84%E1%98%9B%20%EC%9D%B8%EC%B2%9C%ED%9C%B4%EA%B2%8C%ED%85%94%20%EC%9D%B8%EC%B2%9C%ED%82%A4%EC%8A%A4%EB%B0%A9%20%ED%83%80%EC%9E%84"

Calibration
Instructions from Strain Gauge Force Vector Sensing Pole
The goal of calibration is to define a function that will take in a pair of readings for the 2 x strain gauge circuits, and output both the magnitude of the tip force, as well as the direction of that tip force. Here is the procedure to collect the data...

Model Building
Instructions from Gesture Recognition Wearable
As said in the TLDR, the ModelPipeline.py script, found in the Python_Scripts folder, will import all finalized data from the finalized CSVs, create 2 different models an LSTM and CNN, compare the models' performances, and save all models. Note the LSTM...

Initial State
Instructions from Raspberry Pi Smart Scale
We want to stream our weight/data to a cloud service and have that service turn our data into a nice dashboard that we can access from our laptop or mobile device. Our data needs a destination. We will use Initial State as that destination. Step 1: Register...

Overview of the 'Renegade LT100E' quad bike
Instructions from Quad-ROS-bot
On delivery of the quad bike, we took off all the plastic panels, inserted the main fuse and tested the motor with the bike up on wooden blocks. Video 1 shows the main features and build quality of the bike and we also hacked into the throttle connector...

Step 5 - Calibration
Instructions from Telescoping Pole Extension Sensing - Photoresistor
Here are the calibration steps, which are used to relate the photoresistor readings to the extension length of the telescoping pole: Mark extension positions along the tip of the telescoping pole, for example at 5, 10, 15, 20, and 25 inches of extension.Plug...

Motor drive
Instructions from Eazy Peasy High Voltage Variable Capacitor
The basic capacitor is done. This next section is how I built a motor drive to remotely position the capacitor. I decided to use a DC motor. Perhaps a stepper is a better idea, but for now I like this design. The motor I chose is overkill. It was...

Circuit
Instructions from Building an Arduino Energy Monitor & Data Logger
Here is the circuit I used: I used an SD card breakout similar to the Adafruit one (so I used that in Fritzing, as that was the closest part). The connection is pretty standard — CLK (Arduino Uno pin 13), MISO (Arduino Uno pin 12), MOSI...

FoocusStacker
Instructions from FoocusStacker
LCD displayThe LCD display is a generic 4 line 20 character module. It exposes a set of ~16 digital connections. Because the controller has a limited I/O count, the LCD module is connected through the I2C bus. The I2C bus to LCD2004 combination is quite...

Otto DIY
Instructions from Otto DIY
Step 2: 3D print settings Otto is very well designed for 3D printing, the files that you had downloaded are property oriented and centered, so wont give you trouble if you follow this common parameters: Recommended to use a FDM 3D printer with PLA material.No...

Control smart RGBW LEDs from your TPS
Instructions from Control smart RGBW LEDs from your TPS
You will need:TPP2, TPP2(G2), TPP3, or TPP3(G2) boardOne Tibbit #57One Tibbit #20Optionally, one Tibbit #00-3 (if you are going to power your smart LEDs from your TPS system)Several SK6812RGBW LEDs (or a board, or an LED strip containing these LEDs).Optionally,...

3D-Printed Electric Longboard
Instructions from 3D-Printed Electric Longboard
Step 4: Idler SystemAt this stage, your mount is already capable of accelerating but it will not be able to brake efficiently. This is where the idler system comes in. It makes sure that the belt has constant contact with the pulley wheel even during...

DIMER MKII, Large open robotic arm
Instructions from DIMER MKII, Large open robotic arm
Central axis:Items needed:1 - Cilindrical aluminium pipe // 20 mm diameter // lenght: 35 cm // Units: 72 - Cilindrical aluminium pipe // 10 mm diameter // lenght: 35 cm // Units: 63 - Printed parts // numbers : 1 and 2 (Central base gear and base hold)Instructions:-First...

pH meter with Azure Machine Learning
Instructions from pH meter with Azure Machine Learning
Modify and upload the code1. Download the code and the modified TCS34725 library- The modified library is configured to use I2C on pin D5(SDA) and D6(SCL)2. Add the library to your libraries folder and open the code3. Change the following values in the...

Power supply
Instructions from Metal 3D printer
SMPS_1: Isolation transformer just for Isolation - designed ideally to 60kV - in real life it will be much lesspotted in epoxy 22kV/mm = 3mm gaps between PRI/SEC and core = very high leakage inductance = soft sourcehalf bridge topology was chosen due...

Connecting power and LEDs
Instructions from High-power ZigBee LED light controller
If there is still something connected to the 6-pin programming header (reference J1), disconnect it. Then you can power the board by connecting a power supply to the "+" and "-" terminals of the terminal block. The power supply can be anything from 5...

|<
<
3
4
5
6
7
>
>|