Close

344 Results for "Q%20%EC%95%88%EC%82%B0%EB%B8%94%EB%9E%99%EC%9E%AD%20CDDC7_C%D0%9EM%20%E2%97%86%EB%B3%B4%EB%84%88%EC%8A%A4%EB%B2%88%ED%98%B8%20B77%E2%97%86%EC%88%98%EC%9B%90%EC%9E%A5%EC%95%88%20%ED%94%84%EB%A1%9C%ED%86%A0%20%EA%B5%AC%EB%A7%A4%E0%B9%8F%ED%86%A0%ED%86%A0%ED%95%AB%ED%94%BD%E2%8F%AC%EC%98%A8%EB%9D%BC%EC%9D%B8%ED%99%A9%EA%B8%88%EC%84%B1%E0%BC%88FX%EB%A7%A4%EB%A7%A4%E2%8B%8D%EC%95%88%EC%82%B0%EB%B8%94%EB%9E%99%EC%9E%AD%EC%95%A0%EC%9A%A9%20thorough/"

  • Cutting the Acrylic
  • Instructions     from GeoLeaf
  • For this step you will need: Acrylic sheetsSawPencil I am using some 3mm thick opal acrylic to diffuse the light for this project. I purchased some A4 sheets which we can cut three panels worth of acrylic diffusers from. My fourteen triangles therefore...

  • Nozzles, Adapters and Quick-change
  • Instructions     from Thrifty Pick and Place
  • Googling around suggested to me that I want the Juki nozzles as they come with some springiness in the tip. This will allow for a good seal even if the Z is a little off. They do cost a little more than the Fuji. There is an excellent looking quick-change...

  • Tecedi SmartZap: Adblock for TV
  • Instructions     from Tecedi SmartZap: Adblock for TV
  • Floppy up!As a temporary solution and to make good use of 3"5 floppies laying around, I carved floppy disks with a Dremel and used a glue pistol to assemble all of it into a case for my raspberry pi and my HDMI switch.Cutting the floppies was not very...

  • $100 Toaster Hack
  • Instructions     from $100 Toaster Hack
  • Wire the amplifier1. Connect a wire from the 5V pin on your Arduino to the positive rail on your breadboard.2. Connect a wire from the Gnd pin on your Arduino to the negative rail on your breadboard.3. Wire the Amplifiera. Solder the pins to the amplifier...

  • Setup
  • Instructions     from Building an Arduino Energy Monitor & Data Logger
  • Dr. Wattson comes with a companion acrylic enclosure, so that the AC wires are enclosed and you can use it in a safe manner. The enclosure is available on Tindie as well - https://www.tindie.com/products/upbeatlabs/enclosure-for-dr-wattson-energy-monitoring-board/...

  • Calibration
  • Instructions     from Strain Gauge Force Vector Sensing Pole
  • The goal of calibration is to define a function that will take in a pair of readings for the 2 x strain gauge circuits, and output both the magnitude of the tip force, as well as the direction of that tip force. Here is the procedure to collect the data...

  • Theory
  • Instructions     from CNC Part Picking Machine
  • The basis of this system is to keep track of inventory. For example, if someone buys 20 Arduino Uno boards they could easily add that amount to a database table. The category would be "Arduino", name of "Uno", and a quantity of 20. For multiple people,...

  • Final assembly
  • Instructions     from Universal Speed Reducer
  • Components list :Gearwheels and Head assembly1 x Top4 x Screw M3 x 201 x Needle Roller Thrust Bearing 40x60x3mmScrew the four M3 x 20  2. Insert the needle roller thrust bearing in the top

  • Time to Play
  • Instructions     from Controlling ESP8266 using Telegram Messaging App
  • Now all you need to do is open the telegram app open the bot after searching it in the Telegram App by the name you gave to the bot. As you open the bot you will see a Start/Restart button click on that button the bot will start and send you a list of...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday