324 Results for "《〈 문의 OIO↗5793↗7458 》〉 강남셔츠룸ㅬ レresidence㎱강남셔츠룸신사셔츠룸⑧appetite 강남셔츠룸강남란제리 강남셔츠룸╃강남란제리″names㏊"

FarmBot - Open-Source CNC Farming
Instructions from FarmBot - Open-Source CNC Farming
Gantry Assembly 2 hoursThis is the estimated time it will take to assemble the Gantry.Step 1: Assemble the Gantry PlatesGather and lay out all of the parts. You will need:Two Gantry PlatesEight complete V-wheelsEight M5 x 30mm screwsEight M5 locknutsEight...

J1772 Hydra
Instructions from J1772 Hydra
Prepare the internal mounting plate. You will drill holes to mount the two contactors, the power distribution bus, the ground bar and the standoffs for the boards. The plate can be divided logically into the top and bottom half along the center, which...

R.Hasika - a precise and compact robot base (rpi)
Instructions from R.Hasika - a precise and compact robot base (rpi)
Install the idle sprocketsPut the sprocket on the axis, with the metal washer;put the nut on the threaded part;screw the threaded part in the holes on the side using an allen key

Microphone Stand Phone Holder
Instructions from Microphone Stand Phone Holder
Screw the holder to the base using 4MM screws. Use a nut at the back if you feel they are not tight enough.

Featherjib
Instructions from Featherjib
Since I already had a tripod or two to disassemble, I found that the cheapest way to mount a camera to the paint pole was to mate the round tube that attached the head to the tripod body to a round paint roller handle that had the proper threads to attach...

Cinebike Human Powered Cinema
Instructions from Cinebike Human Powered Cinema
Next up if you want to build a generator you will need a generator motor. I settled on this one - a 24V 200W motor. Voltage doesn't matter for our purposes - the output voltage will be directly correlated to the RPMs you spin the motor at. On the motor...

Locking ball and socket gooseneck system
Instructions from Locking ball and socket gooseneck system
place nut over ball joint first before snapping socket onto ball.

Locking ball and socket gooseneck system
Instructions from Locking ball and socket gooseneck system
Slide nut onto socket, take care to align the locking features.

Locking ball and socket gooseneck system
Instructions from Locking ball and socket gooseneck system
Twist quarter turn to lock in place. Small hex flats are 10mm, large hex flats on the twist-lock nut are 18mm.

Crazy Clock
Instructions from Crazy Clock
INSTALLING THE MOVEMENTIf you buy a complete movement, it will come with the movement itself, 3 hands and a bag of hardware. The hardware bag will have in it a large rubber washer, a small metal washer, a hex nut, a round nut and a round cap.Depending...

Praxis Zero mk2 Mantis
Instructions from Praxis Zero mk2 Mantis
Program CNCThis is the general Machine-Operations set that was used to create the release candidate:CNC partsG-code body back T2 roughing profiles roughing back cover e cavity T3 ball parallel surface set 1 set 2 T4 detail seats bolt holes front T2 roughing...

The FireVolt Project
Instructions from The FireVolt Project
Using high shear-strength 1" long 1/4" dia hex bolts - mount the T-beams to the TEG water blocks, (Bolt head outside, Nut inside). Apply high temperature thread locker to every bolt prior to nut installation.

Up-Ride, the Bicycle to Elliptical Conversion Kit
Instructions from Up-Ride, the Bicycle to Elliptical Conversion Kit
Tubing and ConnectionsI cut my tubes based on the four bar ratio I wanted (will edit to put numbers here later)I welded the clevises (see tools and materials) male and female ends on and ran appropriate sized bolt and nut. Washers optional.For the tube...

Hand Drive
Instructions from Hand Drive
Hand Drive Assembly InstructionsPrint out the parts(1) Annular gear(1) Bar Holder(1) Base(1) Knarp Tensioner(3) Planet Gear(1) Ratchet(1) Stacked Gear(1) Sun Gear1)Hammer in three 5/16 inch bearings into underside of the sun gear.2)Attach three planet...

Compact SMT Soldering Rig
Instructions from Compact SMT Soldering Rig
Specifics of the actual construction are left to the readers' discretion. The adjustment dial is the only tricky part, referring to the diagram, it works like this:The first nut is tightened down hard with a lock washer against the dial.^-- This assembly...

|<
<
1
2
3
4
5
>
>|