1979 Results for "《〈 문의 OIO↗5793↗7458 》〉강남초원의집㉩⅓everythingァ강남유흥강남룸㏁evidently 강남초원의집강남더킹 강남더킹‡강남룸Ⅹfaintly㈆"

Soldering the PCB
Instructions from LoRaLamp AIRQuality
You may want to start soldering on the TOP Layer of the PCB. Reason for this: It is easier to fix the PCB on you desk if the LEDs on the bottom side are not soldered yet. Start with the smallest parts first. Resistors, Capaitors, LDO and Diodes...

Mount All PBCs and Components
Instructions from Fear the Scary Cat!
Now that you've successfully programmed the microcontroller, you should be able to mount the ISD1820 and prototype PCB to the base housing using M2 and M3 screws. (Before proceeding, you could also perform some additional testing to confirm that everything...

Ordering the PCB
Instructions from Simple Brake Light for FS Vehicle
To get the PCB manufactured, you have to upload the Gerber files in a .zip, or .rar file. If you don’t know how to generate proper gerber files in KiCad 5? JLCPCB provided a proper tutorial: https://support.jlcpcb.com/article/149-how-to-generate-gerber-and-drill-files-in-kicad...

Test
Instructions from Tiller Autopilot Limit Switches
Now you can test the unit by connecting a 12V power source (a 9V battery might work). If you connect the + to the wire going from the inboard switch to the PCB and the minus to the motor's - (black) wire the unit should begin to move and stop moving...

Assembly
Instructions from ESP32 Personal Bat Signals with Light and Sound
Above: Look at that pretty PCB, just waiting for everything to be nestled into it. I strongly recommend using headers for the dfplayer mini clone and the boost converter... it makes it a lot easier to swap out parts when there is a "whoops."Below: Here...

CONCLUSION
Instructions from XIAO ESP32 Home Automation Shield
This project was successful because we can use this board to turn any appliance into a smart internet of things appliance. We can connect the relay directly to an existing power board and connect the AC switch in parallel with it to divert current...

Thermal Testing
Instructions from DIY USB-PD Powered MCH Automatic Reflow Hotplate
In order to test the hotplate, screw the base to the PCB assembly and stick a temperature sensor to the surface of the hotplate with Kapton tape. Press and hold the "START" button to start reflowing. The yellow LED should start fast blinking indicating...

Terminal blocks
Instructions from Over-engineered LED strip controller
The board will have a total of 28 screw terminals for attaching various wires. It's 2 blocks of 6 pins and 4 blocks of 4 pins. They are arranged around both the top and bottom of the PCB. How you place the terminal blocks will depend in part on your...

It All Comes Together
Instructions from Binary Wrist Watch
By now we have gathered all the parts now it's time to put everything together. Due to a lot of planning this step is really easy and straight forward. Take a look at the pictures to see the order of how everything is mounted. The screws used to mount...

Assembly!
Instructions from Exporer Uno PCB Software Template
Once you've received your components and your PCB, you're ready to assemble them. There are a lot of configurations that can work, so keep in mind the final shape of your PCB is entirely up to you and the project you are building!Let's start with the...

ATX power supply conversion for bench usage
Instructions from ATX power supply conversion for bench usage
Prepare the adapters and connect them to the terminal stripsThis part is important and tricky, and it took me three attempts to get this right. Here's the rules: Any high-current line must be a twin line that starts as a twin at the power supply's PCB...

ChaiBot
Instructions from ChaiBot
While the CAD files for the case should be good for all types of CD Drive, the electronics are going to have to fit in whatever space is left after removing the bulk of the original CD mechanism. All that's retained is the tray and front portion containing...

Solid state flow sensing using EIS
Instructions from Solid state flow sensing using EIS
Lightly put the male header in the female header. We will be soldering it to the electrode PCB in this step.Now make sure your glue has set, and put the electrode PCB on the screws of the signal generator PCB. Make sure the seagulls and text have the...

Solid state flow sensing using EIS
Instructions from Solid state flow sensing using EIS
Solder the signal generator board together. You can use the component guide below to figure out where to place what component.There are some things to keep in mind while assembling the PCB. First up, the footprints for the resistors are really tight,...

Case assembly
Instructions from PiPod
1. Place the top down 2. Put the navigation buttons in place 3. Put the PiPod board on top (make sure you've put in the screw between the RPi and PCB circled in red) 4. Put the side buttons in place and make sure they have a loose fit. If they are too...

|<
<
3
4
5
6
7
>
>|