3515 Results for "《 예약문의 OIO≡⑧④89≡83O⑥》선릉레깅스룸㉹ベgrace레깅스룸Ｓ선릉레깅스룸선릉레깅스е я레깅스룸비용superstition 강남레깅스룸′강남레깅스§８fetch"

Quick and Nasty Tube Power Supply
Instructions from Quick and Nasty Tube Power Supply
For this step you will want a variac or some way to limit the mains current. You might want to put a lamp in series with the hot wire to the transformer (are you sure you're comfortable working with mains electricity?)Connect everything up as you did...

Quick and Nasty Tube Power Supply
Instructions from Quick and Nasty Tube Power Supply
The transformer might (should... some cheap ones aren't) be coated in varnish. Start by running a butter knife or similar around an iron lamination at one end to split it off the stack. You'll notice that it won't budge. This is the tricky bit... you...

Quick and Nasty Tube Power Supply
Instructions from Quick and Nasty Tube Power Supply
Now you can start to remove the E and I laminations one by one. Just run a knife between each lamination and it'll break off. Be sure to put them in a container of some sort instead of just piling them up on the table (as pictured).

Connecting 5V sensors to OpenWrt GPIO
Instructions from Connecting 5V sensors to OpenWrt GPIO
OpenWrt setupI use GPIO 29 so for input the setup looks like this:/etc/rc.local: # Put your custom commands here that should be executed once # the system init finished. By default this file does nothing. echo “29″ > /sys/class/gpio/export; echo...

Animatronic Iron Man MKIII suit
Instructions from Animatronic Iron Man MKIII suit
Notes about mechanics and suit construction:Greg's suit is molded fiberglass. It is unlikely that a foam suit would be rigid enough to support the animatronic systems without some sort of reinforcement, especially in the shoulders as a large area has...

Animatronic Iron Man MKIII suit
Instructions from Animatronic Iron Man MKIII suit
Notes about tools and materials used:ProPoxy 20 is awesome stuff. When making the brass tube pivots for the shoulder rocket pods it was easiest to glue the brass tube to the servo casing with superglue ( I use Gorilla glue with a spray accelerator) and...

Late Night Reading Lamp
Instructions from Late Night Reading Lamp
Solder LEDs, resistors etc onto a bit of veroboard. I used a female PCB header for plugging in the battery so that I didn't have to route long cables around the frame. Leave some length on the LED pins so that they stand up a bit from the veroboard

Late Night Reading Lamp
Instructions from Late Night Reading Lamp
Heat up some polymorph and use it to encase the LEDs (acting as a diffuser) and also fix the LED veroboard to the coathanger... you are done!

Shootable ALIENS Egg & Jumping Facehugger Target
Instructions from Shootable ALIENS Egg & Jumping Facehugger Target
Now make the Egg. I used Google image search to find a half-decent picture of an egg and had it printed in color at a print shop.Glue it to some sturdy cardboard and then cut it out.

Shootable ALIENS Egg & Jumping Facehugger Target
Instructions from Shootable ALIENS Egg & Jumping Facehugger Target
Attach the Egg to the front of the popper. I used some caulking, but any sturdy, gap-filling glue should do the trick.

Shootable ALIENS Egg & Jumping Facehugger Target
Instructions from Shootable ALIENS Egg & Jumping Facehugger Target
Set it up in a suitable place, load up your shotgun, and so some live-fire ALIENS re-enacting!

Portable LED Floodlight
Instructions from Portable LED Floodlight
Spend some time on your LED and battery selection. These are the two most expensive items, and of course the most important.In my case I'm trying to light a volleyball court. The light I'm considering is available in 30º spread or 60º spread....

Portable LED Floodlight
Instructions from Portable LED Floodlight
Wire up the business end too. A few extra zipties to keep tension strain off the crimp connections.The lights included some stainless brackets and hardware. The light to pole interface I had to get creative.. a few 90º brackets and a hose clamp...

Portable LED Floodlight
Instructions from Portable LED Floodlight
Wrap some bright yellow tape on it because one of your drunk friends will run into it. Unless your drunk self runs into it first.

ChipWhisperer®: Security Research
Instructions from ChipWhisperer®: Security Research
Start following some of the tutorials [link: http://www.newae.com/sidechannel/cwdocs]! If you have trouble check out the forum at https://www.newae.com/forum

|<
<
3
4
5
6
7
>
>|