Close

3515 Results for "《〈 문의 OIO↗5793↗7458 》〉 셔츠룸ヒ 《〈 문의 OIO↗5793↗7458 》〉 ㎛beforehandム셔츠룸후기셔츠룸후기╇pen 선릉셔츠룸셔츠룸가격 셔츠룸‰강남셔츠룸㉦nestㅳ"

  • openSip+Puff
  • Instructions     from openSip+Puff
  • Get an openSip+Puff PCBPCBs and assembled boards will be made available once prototyping is finished and I can find some way to raise the capital needed. For now you can get boards made through OSHPark using the Eagle files supplied, but please contact...

  • Assemble the stylus
  • Instructions     from Stylish!
  • Take an old pen and clean and hollow it. Get a non sharp, solderable bit of metal to use as the point. I used the tip of a 1/4" plug. Put your holes in your pen for the wire to get to the tip and thread the wire through. Solder the wire to the tip....

  • Pros and Cons:
  • Instructions     from Make Wall Art with an iDraw A3 Pen Plotter
  • PROS Easy Setup: The iDraw 2.0 A3 pen plotter comes almost fully assembled, so you can start using it quickly without much hassle or time wasted on a complicated setup. Precise and Accurate Results: The advanced stepper motors in the iDraw 2.0 A3 ensure...

  • Conclusion:
  • Instructions     from Make Wall Art with an iDraw A3 Pen Plotter
  • I absolutely love the iDraw 2.0 A3 pen plotter, and I'm super excited to use it for many more projects. As a beginner, this pen plotter has exceeded my expectations and opened up a whole new world of creativity for me. Setup was a breeze, and it works...

  • Grandma's Pill Box
  • Instructions     from Grandma's Pill Box
  • Cut holes for the button and buzzer, and another to show the cloud indicator led. My button is not flush with the box top, so I attached a taller piece of plastic to the button with velcro. Poke holes in the box top with a sharp pen and push the long...

  • Preparing the CAN module
  • Instructions     from CAN Simple
  • Before you do anything else, remove the 120r resistor from between CanH and CanL.  We're going to mount the module face down on the back of the proto board and then it'll be too late. Have a look at the back of the module and see if the markings...

  • DIY Jukebox With Raspberry Pi
  • Instructions     from DIY Jukebox With Raspberry Pi
  • Step 7: CONNECT YOUR PHILIPS HUEThere are no jukeboxes without flashy disco lights! A fun way to integrate some nice visual effects could be to connect Philips Hue lights to your Prota Pi so that your music’s rhythms are improved by funky colors.You...

  • Testing With Out Pen Up Down
  • Instructions     from Cute Drawing Robot - Servo and Android
  • 1) Now the 2 servos are fitted to the aluminium frame slot and stick with hot glue gun. 2) Join the arms with screws and before fitted fully, want to check and tune the software. 3) So paste the frame to a flat surface facing each other correctly center....

  • Checking All
  • Instructions     from Cute Drawing Robot - Servo and Android
  • 1) Its time to check. 2) Connect the connectors and power supplies. 3) Draw lines in the application and click open port and then click draw buddy. 4) Buddy draw it as like the picture . Problems Faced at first 1) Drawing is drawn in mirror format. 2)...

  • Cube Pre-Assembly Notes
  • Instructions     from 8x8 WS2812 LED Cube
  • There's a couple options to assemble in terms of adhesives.   I haven't tried super glue because prior projects usually ended up having fuming issues that stained some materials.  Hot glue worked great for me, my first assembly...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday