102 Results for "∇ 최저가 Ò1Ò《⑤⑦93》74⑸⑻ ∇런닝래빗가격β런닝래빗주대result런닝레빗가라오케주대런닝래빗주대런닝레빗가라오케주대voyage 런닝래빗가라오케ㅅＧ런닝레빗가라오케주대indies"

Portable travel NAS
Instructions from Portable travel NAS
Let's get cracking, get the Carambola up and running. I like to connect to the serial terminal, the development board features a usb ftdi chip allowing me to use a terminal program like PuTTy to connect.Connecting to serial terminalFirst step: see that...

ramanPi - Raman Spectrometer
Instructions from ramanPi - Raman Spectrometer
Section: 5A complete Laser Emitter AssemblyComponents Required: Printed versions of the following 3D Printed Objects from the gitHub repository: (1x) electronic_mount_laser_bottom(1x) electronic_mount_laser_top(1x) 532nm 150mw Green...

Infinity Mirror Clock
Instructions from Infinity Mirror Clock
Electronics: A Standalone Arduino: http://dushyant.ahuja.ws/2013/10/standalone-arduin...OR Arduino mini pro: http://www.aliexpress.com/item/10Pcs-Lot-Pro-Mini-...RTC Module – DS1302: http://fabtolab.com/DS1302-RTC-module?search=rtcLM2596 Step Down Adjustable...

ESP8266 Retro Browser
Instructions from ESP8266 Retro Browser
Getting Starting - Changes to the Seeed Tutorial After a 3 or 4 week wait, your ESP8266 Serial Wifi modules have finally arrived from China. Now what? For a first program, most people head for the short tutorial at seeedstudios http://www.seeedstudio.com/wiki/WiFi_Serial_Transc......

Simple Edison Breakout Board
Instructions from Simple Edison Breakout Board
Simple UART level converter.As I'm sure you are aware, the Edison is 1.8v gpio only so you either need to get a 1.8v TTL USB Cable or you can use a 3.3v or 5v Arduino style TTL USB cable, but it will need a shift level to achieve this.So a simple design...

Reviving tossed stepper motors
Instructions from Reviving tossed stepper motors
Now that we know what kind of stepper motor we have, we can build a simple test circuit to get the thing moving. At the bottom left, the control pins for the motor can be connected to any TTL logic device you wish to use to run the motor (in my project...

Reviving tossed stepper motors
Instructions from Reviving tossed stepper motors
Next we have to set up the control software to drive the motor. Each of the motor phases should be connected to a pin of your TTL control device such as a GPIO pin on an Arduino Uno. In order to turn the motor in either direction, we have to turn on...

ESP8266 Wifi Smart Garage Door
Instructions from ESP8266 Wifi Smart Garage Door
Wire the ESP-01 as follows. Go ahead and leave your TTL converter connected so you can continue programming and debug.

ESP8266 Wifi Smart Garage Door
Instructions from ESP8266 Wifi Smart Garage Door
Connect your ESP-01 to your TTL serial converter and flash your ESP-01 with NodeMCUFollow Marc's good instruction on how to load NodeMCU onto your ESP-01 at https://importhack.wordpress.com/2014/11/22/how-to-use-ep8266-esp-01-as-a-sensor-web-client/ESPlorer...

Yet another laser engraver / cutter
Instructions from Yet another laser engraver / cutter
Laser-module and driverFor the laser module I choose a relatively cheep heat sink and a standard 3-layer glass lens (450 nm) and a Osram PL TB450B 1.6 W_opt. 450 nm diode from China. The lens came in a package with the heat sink.As the power source for...

Yet another laser engraver / cutter
Instructions from Yet another laser engraver / cutter
Stepper motor driver boardI basically copied the GRBL shield or any other stepper driver board for the A4988 driver there is.I used BlackBoard 1.1 for the PCB design, neverthless the wireing is horrible ! I am not that into electronics. After a lot of...

Hummingbird
Instructions from Hummingbird
Step 2: The coordinator nodeThe coordinator node is also the same solar power set but it consists of a GHI CerbuinoBee an XBee (series 2) and some sort of way to connect to the internet. We've demonstrated this project with a GHI GPRS module, shown in...

WiFi Lawn/Garden Sprinkler Controller (ESP8266)
Instructions from WiFi Lawn/Garden Sprinkler Controller (ESP8266)
General Hardware DescriptionAn ESP8266 with 4MB (32Mb) of flash is required. The software makes extensiveuse of the flash storage for both OTA updates and spiffs. Generally this isan ESP-12x, but other models may be used. In my case I used a WeMos D1...

WiFi Lawn/Garden Sprinkler Controller (ESP8266)
Instructions from WiFi Lawn/Garden Sprinkler Controller (ESP8266)
When initially powered on, the internet access point will not be setup.The ESPrinkler will therefore switch to AP mode. It will be come anaccess point in itself.So connect to ESPrinkler2_XXXXXX with a wifi enabled device (nopassword).Browse to 192.168.4.1The...

SmartEE the Smart Plug
Instructions from SmartEE the Smart Plug
To initialize the plug with your wireless network SSID and password, plug it in and connect the USB plug to your computer. It should show up as a TTY serial interface (it enumerates as an ACM device). Use your favorite terminal emulator to connect. When...

1
2
3
4
5
>
>|