7 Results for "%E3%80%8A%20%EC%98%88%EC%95%BD%EB%AC%B8%EC%9D%98%20OIO%E2%89%A1%E2%91%A7%E2%91%A389%E2%89%A183O%E2%91%A5%E3%80%8B%EC%84%A0%EB%A6%89%EB%A0%88%EA%B9%85%EC%8A%A4%EB%A3%B8%E3%89%B9%E3%83%99grace%EB%A0%88%EA%B9%85%EC%8A%A4%EB%A3%B8%EF%BC%B3%EC%84%A0%EB%A6%89%EB%A0%88%EA%B9%85%EC%8A%A4%EB%A3%B8%EC%84%A0%EB%A6%89%EB%A0%88%EA%B9%85%EC%8A%A4%D0%B5%20%D1%8F%EB%A0%88%EA%B9%85%EC%8A%A4%EB%A3%B8%EB%B9%84%EC%9A%A9superstition%20%EA%B0%95%EB%82%A8%EB%A0%88%EA%B9%85%EC%8A%A4%EB%A3%B8%E2%80%B2%EA%B0%95%EB%82%A8%EB%A0%88%EA%B9%85%EC%8A%A4%C2%A7%EF%BC%98fetch"

Load the program for the Arduino pro mini.
Instructions from Bracelet for the blind
//tác giả: Đỗ Xuân Tiến #include const int trig = 8; //chân trig của HC-SR04 const int echo = 7; //chân echo của HC-SR04 byte ngon_tay_cai_6 = 6; //ngón tay cái - thumb //byte middle_finger...

Rails
Instructions from Rave in a briefcase
I went for 2x3U. I screwed a piece of roofing battens into the case and the bottom rail directly onto them. The middle rails are just screwed together and are laid onto some standoff I laser cutted out of some scrap wood. The top rail...

Powersupply / MIDI / Audio Out
Instructions from Rave in a briefcase
Next thing was the PSU. Since I had a spare NiftyCase laying around, and they have a PSU / MIDI In and Audio Out already in the case, I decided to just canibalize this. The NiftyCase electronics consists of two PCBs, connected with a ribon cable. I laser...

LED Control From the Web Browser
Instructions from LED Control From the Web Browser
Web clientindex.htmlComments in the code explain how it works:

Adding a display
Instructions from Raspberry PI wireless Telescope Control
The e-paper display I have makes use of the UART on the GPIO which collides with the GPS. I decided to switch to an OLED display, which only uses the I2C. It is a 1.3" 128x64 pixel display using the SH 1106 controller. Use raspi-config to enable...

ISA USB + Wi-Fi card
Instructions from Toshiba T3200SXC fix/upgrade: new PSU, LCD, WiFi
An ISA wireless network card can be built using a small OpenWRT router module attached to a typical ISA ethernet card. I used a generic NE2000 compatible ISA card and small A5V11 router module, which can be flashed with OpenWRT (https://openwrt.org/toh/unbranded/a5-v11)....

WiFi World Clock
Instructions from WiFi World Clock
X-8266 x1X-OLED x118650 battery shield V2 x1Simple 3D printed case X1You can have a look at the pin map.SDA is connected to D1.SCL is connected to D2.This two pins work as the IIC pins.The other pins can be connected to other sensors.The X-8266 can really...