150 Results for "arduino"

Programmingg Arduino
Instructions from Lightning detector
First, download the sample code I provided, or the "Sketch FT1324M.zip" file, then unzip it on your PC, for example on the desktop.Now open the Arduino IDE version 1.6.7 and open the unzipped file from the "File> Open" menu. In the folder there will...

Arduino Code
Instructions from Joy Robot (Robô da Alegria) 2017 edition
Install the latest Arduino IDE. No library was needed for communication with ESP-8266 module or control of the DC motors. I'll need to add the following libraries: LedControl.h: library used to control the LED matrixes;Adafruit_PWMServoDriver.h: library...

Arduino Code Upload
Instructions from ARDUINO BLUETOOTH CAR ARDUINO UNO|L293D|HC-05
Now I had to upload the code to the Arduino UNO.So I have attached the USB cable that comes with the Arduino UNO board and follows the steps mentioned below Open Arduino IDE on your PC Connect ARDUINO with PC via USB Cable Go to Tools > manage libraries...

Arduino Code Upload
Instructions from ARDUINO Voice Controlled Boat | DIY PCB Project
Now I had to upload the code to the Arduino UNO.So I have attached the USB cable that comes with Arduino UNO board and follows the steps mentioned below Open Arduino IDE on your PC Connect ARDUINO with PC via USB Cable Go to Tools > manage libraries...

Arduino Code Upload
Instructions from Arduino Light Tracking Robot with LDR
***Please don’t forget to remove/detach the remove the yellow jumper cap from the motor driver before uploading the sketch/code. Re-Connect it after the code has been uploaded successfully.

Connections to the Arduino
Instructions from Belgian Railway Station Clock
As you can see in the table on the notebook, solder the wires on the ULN2003 driver boards and connect them to the corresponding Arduino pins. The detector and the stepper motor, most below positioned, are for the seconds gear. The detector and the stepper...

Program the Arduino Microcontroller
Instructions from Control a Stepper Motor with Your Finger!
Copy and paste any of the two codes in the Arduino IDE:Code for stepper motor control with homing function and no acceleration/deceleration feature:/* * Arduino code to control a stepper motor's postion using a PS/2 touchpad or mouse. * Made by Tech...

Get started with Arduino IDE
Instructions from MINITEL + ESP32
Install software Arduino IDEAdd Arduino-ESP32 core to the IDE as described hereinstall Minitel1b library as follows download Minitel 1b library as ZIP filein Arduino IDE, go to Sketch / Include Library / Add .ZIP Library and select your ZIP fileConnect...

Connect the Servo Motors to the Arduino
Instructions from Bot-thoven: A Robot Musician
Connect each servo to the Servo Driver (PCA9685) and use a servo extension cable if necessary. Wire the servo driver to the Arduino board as shown below.

Setup FireBeetle ESP32 on Arduino IDE
Instructions from IoT Cat Litter Box (with ESP32 and Thingspeak)
For this project I used Arduino IDE for programming my ESP32 module. It's the easiest way if you've already used an Arduino before, and you won't need to learn a new programming language, like Python or Lua for instance. If you've never done this before,...

Loading the software on the Arduino
Instructions from USB MIDI Breath Controller
For this project we'll need an Arduino Mega or UNO that has either a 16U2 or a 8U2 chip for USB communication. I'm using a Mega with a 16U2 chip. Many chinese manufacturers use a cheaper one on their arduinos, but only these work with the firmware we...

Feather FONA Setup using the Arduino IDE
Instructions from Connect your Adafruit Feather 32u4 FONA to Ubidots
1. Download the latest release of the Arduino IDE if you not already have it. 2. Open the Arduino IDE, select Files -> Preferences and enter the URL below into the Additional Board Manager URLs field. You can add multiple URLs by separating them...

Feather HUZZAH Setup using the Arduino IDE
Instructions from Connect your Feather HUZZAH ESP8266 to Ubidots
Begin by connecting your Feather HUZZAH ESP8266 to your computers USB port to configure the device. 1. Download the Arduino IDE if you not already have it. 1a. Open the Arduino IDE, select Files -> Preferences and enter the URL below into the Additional...

Setup the Arduino IDE with your device
Instructions from Connect Your ESP8266 to Any Available WiFi Network
To start with any ESP8266 device you have to install the boards into the Arduino IDE, please follow the steps below to be able to compile the board. Please download the Arduino IDE if you do not already have it. 1.- Open the Arduino IDE, select...

Setup WEMOS D1 Mini using the Arduino IDE
Instructions from Connect the WEMOS D1 Mini ESP8266 with Ubidots
Begin by connecting your WEMOS D1 mini to your computers USB port to configure the device. 1.- Download the Arduino IDE if you do not already have it. 1a. - Open the Arduino IDE, select Files -> Preferences and enter the URL below into Additional...

1
2
3
4
5
>
>|