Close

185 Results for "%EB%8C%80%EA%B5%AC%EC%98%A4%ED%94%BC%EA%B0%95%EC%B6%94%E2%86%B2www%2Coptime4.com%EB%8C%80%EA%B5%AC%EC%98%A4%ED%94%BC%20%EB%8C%80%EA%B5%AC%EB%A7%88%EC%82%AC%EC%A7%80%20%E2%86%B2%20%EB%8C%80%EA%B5%AC%EC%98%A4%ED%94%BC%E1%99%97%20%EB%8C%80%EA%B5%AC%EC%98%A4%ED%94%BC%EC%83%9D%EA%B0%81%E1%99%97%20%EB%8C%80%EA%B5%AC%ED%9C%B4%EA%B2%8C%ED%85%94%20%EB%8C%80%EA%B5%AC%ED%82%A4%EC%8A%A4%EB%B0%A9%20%ED%83%80%EC%9E%84"

  • Deployment
  • Instructions     from Running Faucet Alert System
  • #include #define EIDSP_QUANTIZE_FILTERBANK 0 #define EI_CLASSIFIER_SLICES_PER_MODEL_WINDOW 3 #include #define serialDebugOut Serial #define MY_PRODUCT_ID "com.xxxxx.xxxxxx:running_faucet_detector" #define FROM_PHONE_NUMBER "+16467xxxxxx" // Twilio provided...

  • GCODE Commands
  • Instructions     from DIY Inkjet Printer
  • The printer can be controlled by sending values via i2c. Each set bit represents a printer command like: 0 - everything off 1 - single drop printhead 1 2 - single drop printhead 2 4 - single drop printhead 3 8 - single drop printhead 4 16 - drops at...

  • Rpi Zero StarWars Clock

  • Instructions     from Rpi Zero StarWars Clock
  • Create start.sh as Code example.#!/bin/sh #On Staging kernel not needed #sudo modprobe fbtft dma #Example for hy28B sudo modprobe fbtft_device name=hy28b fbtft_device.speed=3000000 rotate=90 fbtft_device.fps=20 sleep 10 fbcp& JAVAFX_DEBUG=1 java -Dcom.sun.javafx.experimental.embedded.3d=true...

  • DIY Jukebox With Raspberry Pi
  • Instructions     from DIY Jukebox With Raspberry Pi
  • Step 1: REQUIRED COMPONENTSRaspberry Pi 2 or 3 // ~$10~$3516 GB SD card // ~$8Big breadboard // ~$4GPIO buttons + jumper and hook-up wires // <$2speakers ~$0usb stick ~$0philips hue bulb ~$10-$20you can get everything for around $50.< body></$2speakers>...

  • Simple TTL logic tester
  • Instructions     from Simple TTL logic tester
  • For the prototype there isn't much to instruct. I use a cheap China prototype-shield with a fitting bread-board. The only connections are from the shield to the board and documented in the Arduino sketch pinMap.h file. For the prototype the power pin...

  • Wiring Up the Circuits
  • Instructions     from Joy Robot (Robô da Alegria) 2017 edition
  • The circuit was wired up according to the schematics. Arduino: Arduino pin D2 => L298N pin IN4Arduino pin D3 => L298N pin IN3Arduino pin D6 => L298N pin IN2Arduino pin D7 => L298N pin IN1Arduino pin D9 => MAX7219 pin DINArduino pin D10 => MAX7219 pin...

  • Resource Monitor
  • Instructions     from Resource Monitor
  • Solder wires from UBBB to LCD. (Note that uBBB pins are ordered as if looking at the bottom, since it also serves as a generic 32-TQFP breakout board if you flip it upside down). Specific connections are described below:-Connect pins 1, 5, and 16 on...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday