560 Results for "《 예약문의 OIO≡⑧④89≡83O⑥》강남레깅스룸ⓨ강남레깅스룸singing강남레깅스강남레깅스룸강남레깅스룸remainder 강남레깅스㉮┢선릉레깅스agitation"

SmartEE the Smart Plug
Instructions from SmartEE the Smart Plug
To initialize the plug with your wireless network SSID and password, plug it in and connect the USB plug to your computer. It should show up as a TTY serial interface (it enumerates as an ACM device). Use your favorite terminal emulator to connect. When...

Smart Power Sockets
Instructions from Smart Power Sockets
Connect RF module to Raspberry PI using a bread board and jumper wires.RF module’s power to Raspberry PI pin 2.(VDD -> 5V (#2))RF module’s ground to Raspberry PI pin 6(GND -> Ground (#6))RF modules data to Raspberry PI pin 16.(DATA -> GPIO23 (#16))

Smart Power Sockets
Instructions from Smart Power Sockets
Enjoy!

Up-Ride, the Bicycle to Elliptical Conversion Kit
Instructions from Up-Ride, the Bicycle to Elliptical Conversion Kit
Crank ExtensionProbably the trickiest element of this build.Crank face geometry is silly variable for aesthetic reasons. You may have to go for much thicker flat stock depending on your 3 piece crank (will not discuss 1 piece cranks here, if you want...

Kindle as a home automation controller/sensor
Instructions from Kindle as a home automation controller/sensor
Fit code to your network 1/2In read_fifo.c, I've hardcoded that when program see cvm[1234]: I SupplementarInfoBox:QUICK_LOOKUP:asin=51b5315f-77e9-4927-80b1-a9afbe1c4d76,word=Cuisine:it connects to http://mbp:8080/?toggle=CUISINEI provide with source...

Kindle as a home automation controller/sensor
Instructions from Kindle as a home automation controller/sensor
Fit code to your network 2/2Modify Docs/http_relay.py to change "mbp" :HOST_NAME = 'mbp'To the host of your computer. You can use IP either. And then start the "http relay" with python2 :kindle-home-automation/Docs $ python2 http_relay.py Server Starts...

DIY MIDI FIGHTER
Instructions from DIY MIDI FIGHTER
Building the boxFirst of all we need to make an enclosure. I decided to make my own cause I didn't find any online. I made mine in oak. I recommend that you don't make the box too small so you can fit the components inside. My box is 16cm deep, 16cm...

DIY MIDI FIGHTER
Instructions from DIY MIDI FIGHTER
Yay! You made it to the second step! In this step we will solder all the components and connect them to the Brain Jr.For this step you will need:A soldering ironSolderA wire stripper16 Arcade buttonsWires1. Strip the wiresStrip the wires.2. Put the buttons...

Hand Drive
Instructions from Hand Drive
Hand Drive Assembly InstructionsPrint out the parts(1) Annular gear(1) Bar Holder(1) Base(1) Knarp Tensioner(3) Planet Gear(1) Ratchet(1) Stacked Gear(1) Sun Gear1)Hammer in three 5/16 inch bearings into underside of the sun gear.2)Attach three planet...

Recursive Range Reduction (3R) HW&SW CODEC
Instructions from Recursive Range Reduction (3R) HW&SW CODEC
Here is the optimised decoding algorithm in JavaScript.function decode_3R(DEPTH, // Log2(sample number) stream) { // pointer to the array of sample var A=DEPTH-1, // stack pointer C=0, // loop counter R, // checksum register S=1> 1; } out_value(V); out_value(T-V);...

Chess Timer
Instructions from Chess Timer
Assemble the circuit, using the prototype PCB from my files or just a standard PCB. The connections are as follows: Setup: Arduino nano Bluetooth HC-05 Addressable 16 LED`s two rings NRF Module Pinout: Arduino Nano 5V: D9-->CE NRF D10-->CSN NRF D13 (SCK)-->SCK...

How to make a cheap $5 BOMB (Dallas style)
Instructions from How to make a cheap $5 BOMB (Dallas style)
HARDWARE:1) Get one Arduino Nano (or clone). I used one with an ATmega328 chip. $2.49 from ebay. 2) Get one 4 Digit 7 Segment LED Clock Display. I used a 5462BS. A CL5642BH also works. I suspect that most of the ones with the colon in the middle have...

Simon Says with DPT-Board
Instructions from Simon Says with DPT-Board
Time to write some code/** * Simon Says for the DPT-Board * Date: 14 october 2015 */ // translating to hardware pins. ex: [23, 22, 1, ...] var output = [6, 7, 16, 8]; var input = [12, 13, 15, 19]; // length of current run var currLength = 2; // generated...

Compact SMT Soldering Rig
Instructions from Compact SMT Soldering Rig
Now go to menu Media – Open Capture DeviceChange the Video Device dropdown to your webcamChange the Audio Device to noneClick the Advanced Options buttonIf you're using a 720p webcam change the aspect ratio from 4:3 to 16:9Also check Device properties...

Digital Voting Machine using PIC Microcontroller
Instructions from Digital Voting Machine using PIC Microcontroller
Source Code :sbit LCD_RS at RB7_bit; sbit LCD_EN at RB6_bit; sbit LCD_D4 at RB5_bit; sbit LCD_D5 at RB4_bit; sbit LCD_D6 at RB3_bit; sbit LCD_D7 at RB2_bit; sbit LCD_RS_Direction at TRISB7_bit; sbit LCD_EN_Direction at TRISB6_bit; sbit LCD_D4_Direction...

|<
<
3
4
5
6
7
>
>|