13748 Results for "《 예약문의 OIO≡⑧④89≡83O⑥》레깅스룸견적よ레깅스룸ago레깅스룸メ강남레깅스룸eighty 선릉레깅스룸κ선릉레깅스⒲레깅스룸メｃ선릉레깅스룸literary"

Solid-state garduino with RTC & LCD!
Instructions from Solid-state garduino with RTC & LCD!
When the junction box is roughly where you want it, collect a relay, and place it in the bottom of the junction box.Using self-drilling dry-wall screws, drill through the hole in the heat sink of the relay, through the junction box, and into the wood. ...

Solid-state garduino with RTC & LCD!
Instructions from Solid-state garduino with RTC & LCD!
If you can't safely wire 120VAC, please stop here. I bear no responsibility for any bodily injury, death, or loss of property as a result of mimicking this project.Wired 120VAC through the Solid State Relays, outlets, and switches shown in the schematic.Within...

Light Emitting Ball (LEB)
Instructions from Light Emitting Ball (LEB)
Laser Cut Acrylic (2.6 mm thick I believe, but you can double check the slot measurements in the DXFs to be sure) Accordign to the following DXFs.https://drive.google.com/file/d/0B_2xkbzRozdxbHZLQ...Solder the ends of each ring of WS2811's together,...

Project 13
Instructions from Project 13
Download the latest release of the software from the Projects Downloads link on the left side of this project page.

Project 13
Instructions from Project 13
Read the Project 13 - Installation and Setup.pdf to setup an instance of the program of your own and get started trying out Project 13.

Keyboard with Apple Mouse Scroll Ball
Instructions from Keyboard with Apple Mouse Scroll Ball
Dremel also removes material on the back side of the plate so that the ball is close to the surface.

Keyboard with Apple Mouse Scroll Ball
Instructions from Keyboard with Apple Mouse Scroll Ball
The ball's ribbon cable goes through careful cuts in the membranes of the keyboard.

Keyboard with Apple Mouse Scroll Ball
Instructions from Keyboard with Apple Mouse Scroll Ball
You can swap a hub's shorter USB cable for the long one the keyboard comes with.

Keyboard with Apple Mouse Scroll Ball
Instructions from Keyboard with Apple Mouse Scroll Ball
You can run most of the trackball's USB wire inside they keyboard above the F-keys.

Setting up Linux AVR and ARM toolchains
Instructions from Setting up Linux AVR and ARM toolchains
INSTALLING MINT ON A RELUCTANT TOSHIBA SATELLITE LAPTOPDownloaded the latest Linux Mint 16 with Mate image via torrent from linuxmint.org. Burned to DVD and used it to boot the Toshiba. All seemed to be going well untill the boot finished and I tried...

Halo 4 Helmet ( Size A, B, C )
Instructions from Halo 4 Helmet ( Size A, B, C )
Step 1 test - these instructions are to test layout / intent of hackaday projects.

Smart Solder reflow oven
Instructions from Smart Solder reflow oven
First thing to do is create simple heater controller. My idea is to use PWM signal what will turn on/of heating element, and because PWM is running more than 1kHz, i can get very fine power control. Here is original circuit:Idea very simple. First i...

Ultra Simple 2x4 Server Rack
Instructions from Ultra Simple 2x4 Server Rack
Have them cut the boards for you to these specs:Board #1 and 2: 20.75", then 20.75", then the remainder should be cut in half (will be 27.25" each, minus whatever is converted to sawdust)Board #3 and 4: Just saw these in half: 48" long.This will give...

Ultra Simple 2x4 Server Rack
Instructions from Ultra Simple 2x4 Server Rack
Bling the heck out of it! You can stick with the bare wood "industrial" look, or give it a coat of paint, some wheels, a shelf or two. Make it yours.

Ultra Simple 2x4 Server Rack
Instructions from Ultra Simple 2x4 Server Rack
Add your gear. Use more wood screws to secure faceplates to the wooden posts. For small items like cable modems and wireless thingamajigs, you can put wood screws into the side and hang them (most of these have special slots, as if they were......

|<
<
2
3
4
5
6
>
>|