13748 Results for "《 예약문의 OIO≡⑧④89≡83O⑥》레깅스룸견적よ레깅스룸ago레깅스룸メ강남레깅스룸eighty 선릉레깅스룸κ선릉레깅스⒲레깅스룸メｃ선릉레깅스룸literary"

Smile Station
Instructions from Smile Station
Well in this step I will focus on the code and getting it to work with Facebook and Flickr ....---------------------------------------------------------------------------------------------------------#!/usr/bin/env python# this file is run using this...

Smile Station
Instructions from Smile Station
Ok I pored the cement in the tube with a blue foam board on the bottom glued to the sides. That seemed to work out well accept I stuck a blue foam board cutout with a hole cut out in it to keep the 2" pvc pipe in place. Bad Idea it moved the PVC pipe...

Smile Station
Instructions from Smile Station
From the last step you should have seen how to and where every thing is going. So lets get started with the power... I used a PC power supply I had. ( 500 Watt ) I cut out the + 12 v and rigged the power supply to come on when power is applied. ...

Sci-fi grade Home Automation
Instructions from Sci-fi grade Home Automation
Build the base station using the following simple steps:Disassemble the outlet controller remote and throw away the plastic casingSolder wires between the +5v line on the Arduino and the positive battery terminal on the remote.Do the same with the ground...

Sci-fi grade Home Automation
Instructions from Sci-fi grade Home Automation
For the end of the base steps: Plug an outlet switch in between each outlet you want to control and whatever you want it to control. Not that you need a picture, but:Congrats! You now have a passable web-based home automation system. Stay tuned...

Sci-fi grade Home Automation
Instructions from Sci-fi grade Home Automation
For the outlet power detectors:Cut the connectors off of your two wall warts and solder the grounds together (and to the ground on their Arduino)Solder the +5v wire of one wall wart to the +5v plug on the Spark core, and the other to digital input 3...

Sci-fi grade Home Automation
Instructions from Sci-fi grade Home Automation
For the Androids involved:This one requires a bit more customization (unless you want a floorplan of my apartment in your system for some reason). You will need to download Unity and adjust the app to your needs. I am not planning on providing complete...

Sci-fi grade Home Automation
Instructions from Sci-fi grade Home Automation
To build the light switches (I'm not using these, but they might work better for those of you who don't rent):Using the pictues below as guides, solder the relevant wires to the Arduino...I kid.There are a few important parts here: There's the Arduino,...

Sci-fi grade Home Automation
Instructions from Sci-fi grade Home Automation
The blind minder itself:(STL files in GitHub)Print the spoolPrint the mountHot glue the spool directly to the motor shaftWrap a piece of duct tape inside-out around the existing stickDo the same around the inside of the spoolUse your girlfriend's hair...

The FatFingerer
Instructions from The FatFingerer
I'm not really going to include a step-by-step. This project is almost too easy and I'm sharing it to give people an idea of what to do with the Leonardo keyboard emulation. My physical design won't work for everyone. I'm not sure that...

A Measured Snow Shovel Improvment
Instructions from A Measured Snow Shovel Improvment
The location of the drill holes turns out to be more critical than I thought. I tried to match the existing holes in the shovel, but apparently I must have slightly flexed either the shovel or ruler while measuring. This caused the end result to be slightly...

ZX7r Ignition connector fix
Instructions from ZX7r Ignition connector fix
Determine if you really need to rework your electrical system. I have had this problem on all of my ZX7r motorcycles, and have repaired them all. The main problem is the machine not starting because these connections supply power to the rest of the motorcycle....

RF light switch
Instructions from RF light switch
DO NOT TRY THIS AT HOME!Okay, with that out of the way, when you do try this, don't do it like me!

RF light switch
Instructions from RF light switch
Transmitter: 4.5-5V supply must be thrown towards the ATtiny. The RF transmitter works best with 12V, but 4.5V proved to be enough for 35m distance (even with the receiver inside the house).The LED is just for an indication that the button press...

RF light switch
Instructions from RF light switch
Receiver:This end is connected to mains voltage (240VAC for me). Ignore the photos as that was done on old board with other projects, and still used ATmega's. Line up a 7805 or your favourite regulator and feed the uC and RF module. Grab a data line...

|<
<
4
5
6
7
8
>
>|