5943 Results for "『 모든문의 OIO=5793=7458 』 선릉셔츠룸㈄『 모든문의 OIO=5793=7458 』 Ηcake²셔츠룸테란강남셔츠룸デwriter 셔츠룸테란강남셔츠룸 선릉셔츠룸⒁셔츠룸사이즈┲exhausted⅔"

Hardware requirements
Instructions from Building Visitor Management System - Waylay IO
For this tutorial, we have decided to use the M5Stack Ecosystem because it enables building such a system without prototyping specific tools, such as a soldering iron or prototyping cables. The brain of this project is the M5Core2, an IoT development...

Wire Connections
Instructions from Building Visitor Management System - Waylay IO
Connect the Mini RFID Reader/Writer Unit to PORT A of the M5Core2 (the red port near the USB-C connector) using the Grove cable. This unit uses the I2C protocol to send data to the M5Core2.Take out the CORE2 plate on the back to expose the pins.The Finger...

Setting up Ameba to be I2C Master
Instructions from Communicate with Arduino UNO via I2C
Next, open another window of Arduino IDE, make sure to choose your Ameba development board in the IDE: “Tools” -> “Board”Then open the “Master Writer” example in “File” -> “Examples”...

Setting up Arduino Uno to be I2C Slave
Instructions from Communicate with Arduino UNO via I2C
In this example, we use Ameba as the I2C master writer, and use Arduino as the I2C slave receiver.When the I2C slave receives string sent from I2C master, it prints the received string. Setting up Arduino Uno to be I2C Slave First, select Arduino in...

Conclusion
Instructions from Accuracy-Sensing Smart Sports Rebounder with ESP32
This proof of concept demonstrates that it's possible to track and log a soccer ball's landing position on a sports rebounder without using a webcam - instead, you can feed the output of several accelerometers into a trained recurrent neural network...

Sound Check
Instructions from Retrex Audio
This is the quick hack of another code sample "Register writer" to play a warm up sound. The hardware is based on the schematic linked in the code. Works with Arduino Uno R3 aka: 328 compatible boards. https://pastebin.com/raw/FehmVLQS /*******************************************************************...

Dew point calculation
Instructions from ESP cookbook
Not hardware, but essential with any temperature/humidity sensors, easier to have it here than to find some earlier sketch with DP calculation. Dew point resembles absolute humidity pretty well, air pressure does affect it but causes only like +/- 0.5°...

EDID Inserter
Instructions from EDID Inserter
Besides a special build of PowerStrip (for Windows) available upon request only,some rare EDID-writing code is still archived online but never made it into mainline due to the serious risk of picking the wrong EEPROM:If you wipe the one on a DVIADD card,...

Prepare the disks and write the image to media
Instructions from pfSense Router/Firewall Install
I'm going to be using two USB sticks for the install process: the first is the pfSense installer and the second is the boot drive onto which pfSense will be installed. But before that, you'll need to decompress the image you downloaded. The following...

All of the steps for the project!
Instructions from Air Pollution Monitoring Project
Let’s get to it! Install Arduino IDE, the esp32 board and the Fixed Libraries. To install the ESP32 board in your Arduino IDE, follow these next instructions: 1) Open the preferences window from the Arduino IDE. Go to File> Preferences 2) Enter https://dl.espressif.com/dl/package_esp32_index.json into...

Code
Instructions from ESP32 Personal Bat Signals with Light and Sound
I used micropython, because I haven't used it for a project yet and I was shocked how well it worked for this. There are many tutorials on how to use Thonny with an ESP32, and I found it to be much quicker than doing this in Arduino/ C++. The main files...

Hummingbird
Instructions from Hummingbird
Step 3: Connect to VivaPlanetThis next step is a bit more complex and requires some C# and visual studio with the Gagetter software from GHI Installed. This will take some time...persist it will be worth it in the end...There are a lot of great tutorials...

Arduino-Compatible FPGA Shield
Instructions from Arduino-Compatible FPGA Shield
Step 1 - Don't panic.

Arduino-Compatible FPGA Shield
Instructions from Arduino-Compatible FPGA Shield
Step 8 - Break out IO pins and port (off-sheet) to top level in project hierarchy.

Free Presidential Style Hotline
Instructions from Free Presidential Style Hotline
MSP430G2231 Code:For a starting point I used this excellent project from Stefan Wendler. MSP430G2231 Software UART. The code below replaces main.c from his “timer-a-uart” branch.#include #include #include "uart.h" #define BUTTON BIT3 //...

1
2
3
4
5
>
>|