Close

1462 Results for "%E3%80%8A%20%EC%98%88%EC%95%BD%EB%AC%B8%EC%9D%98%20OIO%E2%89%A1%E2%91%A7%E2%91%A389%E2%89%A183O%E2%91%A5%E3%80%8B%EB%A0%88%EA%B9%85%EC%8A%A4%EB%A3%B8%EA%B2%AC%EC%A0%81%E3%82%88%EB%A0%88%EA%B9%85%EC%8A%A4%EB%A3%B8ago%EB%A0%88%EA%B9%85%EC%8A%A4%EB%A3%B8%E3%83%A1%EA%B0%95%EB%82%A8%EB%A0%88%EA%B9%85%EC%8A%A4%EB%A3%B8eighty%20%EC%84%A0%EB%A6%89%EB%A0%88%EA%B9%85%EC%8A%A4%EB%A3%B8%CE%BA%EC%84%A0%EB%A6%89%EB%A0%88%EA%B9%85%EC%8A%A4%E2%92%B2%EB%A0%88%EA%B9%85%EC%8A%A4%EB%A3%B8%E3%83%A1%EF%BD%83%EC%84%A0%EB%A6%89%EB%A0%88%EA%B9%85%EC%8A%A4%EB%A3%B8literary"

  • NANO-4096
  • Instructions     from NANO-4096
  • Finally screw the spacer onto the joystick breakout boardSolder the joystick onto the perfboard and connect VCC (5v) and GNDConnect the X pot to A1 (Since the board is rotated X becomes Y)Connect the Y pot to A0Key is not connected

  • Assemble the Four Adafruit Trellis Modules
  • Instructions     from Kord Kontroller
  • Solder up the four Adafruit Trellis modules.  If desired, add LEDs to the top side of the board.  The orientation for the LEDs is noted on the silksreen on the top side of the board.  For more reinforcement, bridge the connections between...

  • Source Code
  • Instructions     from Arduino Amazing Interactive Snowflake
  • #include "SoftPWM.h" #include byte edgeLedPins[] = {13, A4, A5, 2, 8, 12}; byte middleLedPins[] = {10, 6, 3, 5, 9, 11}; byte innerLedPins[] = {A2, A3, A1, 4, 7, A1}; ADCTouchSensor touchSensor = ADCTouchSensor(A0, 1); void setup() {   Serial.begin(115200);...

  • Run a Code
  • Instructions     from AC Voltmeter using Arduino
  • int m; // initialise variable m float n; //initialise variable n void setup() { pinMode(A0,INPUT); // set pin a0 as input pin Serial.begin(9600);// begin serial communication between Arduino and pc } void loop() { m=analogRead(A0); // read analog values...

  • Program the Microcontroller
  • Instructions     from Fear the Scary Cat!
  • Before mounting the prototype PCB to the housing, I recommend uploading the required sketch to the ATtiny84 microcontroller with a programmer of your choice. I used a USBtinyISP type shown in the picture. /*Sketch for the Scary Cat Project by Gene H*/...

  • Run a Program
  • Instructions     from Digital Ammeter Using Arduino
  • #includeLiquidCrystal lcd (7,8,9,10,11,12); void setup() {// put your setup code here, to run once:Serial.begin(9600);lcd.begin(16,2);lcd.clear();} void loop() {// put your main code here, to run repeatedly:int voltage_value0 = analogRead(A0);int voltage_value1...

  • Upload the Source Code to Arduino
  • Instructions     from Useless JokeBot
  • Here’s the programming rationale behind the code, which you can download from the project files. The main idea is to generate a punchline that does never matches the joke. This makes the whole sentence not particularly funny, and probably confusing. ...

  • Arduino Code
  • Instructions     from Arduino Negative Voltmeter
  • // i2c and u8g library for 1306 oled display #include #include "U8glib.h" #define R_LOW 100 // 100k or 10k resistor, 1%, smd1206, 1/10 watt #define R_HIGH 5000 // 5M or 500k resistor, 1%, smd1206, 1/10 watt #define AREF 1.1 // Aref pin voltage #define...

  • Soldering the CPU
  • Instructions     from 68020 minimal homebrew computer
  • Start by soldering the CPU; it can be done with a regular soldering iron. Refer to the internet for guidance on soldering this SMD component (SMD soldering tutorial). The trick is to use flux (and very little tin). For me, this was the first time I soldered...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday