Close

470 Results for "3D printing"

  • Build your own Facemask
  • Instructions     from COVID-19 Facemask
  • 1.      3D Print the mask. I suggest printing it upside down from its original orientation. This provides you with the easiest to remove supports. In my tests printing with the mask print with a rafting to prevent a misprint was required....

  • Getting Started
  • Instructions     from Semisolid Metal Printing
  • The first thing you'll need to do is purchase the components. The bill of materials can be found on the github pageThis metal extruding system is meant to be an upgrade to existing 3D printers, so it is assumed that you already have a 3D printer to modify....

  • How to use Oasis controller software
  • Instructions     from Oasis 3DP
  • Requirements Oasis controller is written in Python. Right now the right Python with libraries is required to run Oasis controller. Install the right python and libraries before running the Oasis controller software. Python 3.6.2 PyQT5 (pip3 install PyQt5)pyserial...

  • Step 2: The choice of materials and sketches
  • Instructions     from ⚡Thor's hammer⚡
  • - The frame: We were advised not to print the hole hammer with the 3D machine. That is why we decided to print only the frame/armature. We use the software Fusion 360 to make the shape of our armature, to after print it in 3d with Cura. But...

  • College shield
  • Instructions     from MXChip IoT Dev Kit
  • I wanted to make a college shield to enclose the board and wear it on the gown. I was thinking of using 3D printing to design and print one but I'd already done 3D printing before. That wouldn't be anything new for me. Meanwhile, we ran an event at...

  • Building premises.
  • Instructions     from DIY hobby servos quadruped robot
  • I'm going to enumerate some important concepts i have taken into account for the robot design. This robots depends hardly on its mass distribution and dynamics of the moving parts (legs). Thats why i decided to go for this servo configuration, having...

  • 3D LED Christmas Tree
  • Instructions     from 3D LED Christmas Tree
  • LEDs Diodes (including LEDs) are also polarized. Be certain to observe that the long lead is positive and the short is negative. Again observe the silk screen printing on the PCB or that the positive solder pad is square. When soldering the LEDs, be...

  • ROBOTIC Arm in plexiglass
  • Instructions     from ROBOTIC Arm in plexiglass
  • PRACTICAL CONSTRUCTION So, having explained the arm we can move on to see how to build it: all the necessary parts are available in assembly kits, in laser-cut plexiglass, complete with accessories for assembly such as screws, bolts, etc. However, nothing...

  • Build Your Trash Printer
  • Instructions     from Ultrastructure
  • There are lots of different ways to recycle plastics - you can extrude it into beams, inject it into molds, and press it into sheets. But each of those methods require special tools and molds.While it's not always the most efficient way to recycle plastic,...

  • Assembling the Face
  • Instructions     from Joy Robot (Robô da Alegria) 2017 edition
  • Four 8x8 LED matrix were used on robot's face. The structure was divided in two parts (face back plate and face front plate) 3D printed using black PLA. It took me around 2.5 hours for 3D printing them, with 10% infill and no supports. Due to space limitations,...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday