3147 Results for "『 모든문의 OIO=5793=7458 』 선릉셔츠룸㈄『 모든문의 OIO=5793=7458 』 Ηcake²셔츠룸테란강남셔츠룸デwriter 셔츠룸테란강남셔츠룸 선릉셔츠룸⒁셔츠룸사이즈┲exhausted⅔"

HandBot
Instructions from HandBot
Once the correct reading of the accelerometer is verified, you will need to set values of operation and you are going to insert this code in the visual engine performance code. Operation will be visually checked by the LEDs before connecting to the the...

PortableSDR
Instructions from PortableSDR
Install 5 countersunk M3 screws though Front cover

DIY Hot Air Solder Pencil Iron
Instructions from DIY Hot Air Solder Pencil Iron
This is quite simple, first you use the Hi temp silicone to seal the metal to plastic junction of the iron. Leave that to set overnight.Cut off about an inch of the 3mm brass tubing, try not to pinch it closed. If you do use the soldering iron...

Raspberry Pi Python Controller
Instructions from Raspberry Pi Python Controller
Attach the cable to pins 2,3,4, and 5.

Raspberry Pi Python Controller
Instructions from Raspberry Pi Python Controller
Upload this sketch to Arduino:void setup() { Serial.begin(9600); pinMode(2,INPUT); pinMode(3,INPUT); pinMode(4,INPUT); pinMode(5,INPUT);}void loop() { Serial.println(digitalRead(2)); Serial.println(digitalRead(3)+2); Serial.println(digitalRead(4)+4); Serial.println(digitalRead(5)+6); ...

Raspberry Pi Python Controller
Instructions from Raspberry Pi Python Controller
If you want you can use this example script(Python) replace YourSerialPort:import serialser = serial.Serial('/dev/ttyYourSerialPort',9600)while True: buttonState = ser.read() if buttonState == '1': print("Button 1 On") if...

$20 Wireless Arduino Home Automation w/ OpenHAB
Instructions from $20 Wireless Arduino Home Automation w/ OpenHAB
Arduino Sketches for demonstration. 1) Ethernet Gateway Arduinohttps://github.com/homeautomationyay/OpenHab-RFM69...2) RFM Gateway Arduinohttps://github.com/homeautomationyay/OpenHab-RFM69...You'll have to make the modifications to...

Daisy Kite Airborne Wind Turbine
Instructions from Daisy Kite Airborne Wind Turbine
Read over this system design note...Daisy Project System DesignIntroductionThe Daisy project is an attempt to realize competitive open source airborne wind energy generation.Project Executive SummaryThe Daisy project is part of the rapid AWE development...

Lexitron RSS Reader
Instructions from Lexitron RSS Reader
Warning: hacker construction projectIf you are interested in making something like this, be warned. This project is a total hack job and will not run on any out-of-the-box hardware I am aware of. Development boards are available, but would require modification...

Lexitron RSS Reader
Instructions from Lexitron RSS Reader
Lexitron circuit design and hardware:LED display: The display is constructed using Red 8x8 square LED matrix displays, each containing 64 LEDs wired in a square grid with the 16 column and row pins available out the base. It is designed to be used in...

Lexitron RSS Reader
Instructions from Lexitron RSS Reader
Tickernut circuit design and hardware:Enclosure:The motherboard is shaped to fit tightly inside a standard ABS jiffy box which set its limited size. The box has cutouts to expose all motherboard connectors on the left side and a small speaker and antenna...

Lexitron RSS Reader
Instructions from Lexitron RSS Reader
Tickernut construction log:Construction was completed in stages over the period of many months with a design that evolved to suit the available parts. The progression of construction was arranged so that each stage could be completed and tested...

The Beamboarder
Instructions from The Beamboarder
Find an old 3.5“ Hard Disc Drive and open it with a Torx 8 screw driver.

ROSCOE - A Scalable, Platform Independent Robot
Instructions from ROSCOE - A Scalable, Platform Independent Robot
Mechanical:For stabilization of wheels a carriage is constructed consisting of 5/8" stainless all-thread and a 16 inch BMX bike fork. 1) Drill 2 3/8" holes 1" from each end of the steerer tube.2) Bisect the fork longitudinally along the steerer...

UM4: Universal Mini Modular Maker Machine
Instructions from UM4: Universal Mini Modular Maker Machine
current test code running on arduinoint Distance = 0; // Record the number of steps we've takenvoid setup() { pinMode(8, OUTPUT); pinMode(9, OUTPUT); digitalWrite(8, LOW); digitalWrite(9, LOW);}void loop() { digitalWrite(9, HIGH); delayMicroseconds(50);...

|<
<
5
6
7
8
9
>
>|