Welcome to the final steps. Make sure the battery is out of the knife.We need to cut off part of the handle from each knife. Measure back from the finger-guard approximately 1 1/4" (30mm) and cut straight across with a saw. I used a hack saw with a 21tpi...
Powershell scriptNow that you have your account set up, we can get the powershell script running! Open up a blank text document in your favourite editor. Notepad would do just fine.Paste the following in: $a=Get-Date; Invoke-WebRequest http://client.akamai.com/install/test-objects/10MB.bin|Out-Null;...
Phase 1: Step 5Write some Gcode!Learn how to properly initialize your machine. There are plenty of tutorials and explanations of this, but expect to have something like the following string of code at the top of your program: G21 (Units in millimeters)...
Next step is to connect the drains of the MOSFETs (their center leads) to the central 8-pin connector; there will ultimately be a header that plugs into this connector, wiring up the connection to the LEDs.So I'm writing this after finishing all the...
3. DisplayThe screenThe screen we are using was part of a now discontinued case for the Raspberry Pi called the Qubit. It is a 7-inch IPS screen with a maximum resolution of 1024 x 600 and looks fantastic when up and running. If you are looking for the...
Mount the LEDs Step 1: Go along the LED chain, marking one side of each LED.Be sure that all LEDs are marked on the same side. Step 2: Cut the LED string to make a pile of individual, LEDs, each with a mark. Step 3: Thread the LEDs onto the proto board,...
Cutoff two pieces of copper pipe 11" long, one 22", one 4 1/8", and two 1.5". Use a pipe cutter for this, it will make nice square edges.Drill a 1/4" hole through the center of the 4 1/8" piece for the eyebolt. Insert the 1.5" long pipe as connectors...
1. From a length of 10 cm PVC pipe cut roughly 60 - 70 cm of pipe. This will house the Raspberry pi and the Ricoh Theta housing will rest on top of this. Insert the wooden fence pole into the PVC pipe and mount permanently with some wood screws through...
In this Tutorial from Hobbyware.org I will show you how to how to setup an RFID Reader on Windows IOT Core, from start to finish. Some of the things we will go over will be: Products to Purchase, Hooking up the RFID and Installing the OS, the code, and...
Read through how I built mine in the project description. The pictures show almost all you need to know, and the text tells you the rest. Read it carefully - there are some important details you might miss. And definitely read it all the way through...
Convenient way to add plenty of environmental information with limited number of wires. Four BME280s can deliver four pressure+temperature+humidity sets with six wires (Vcc,Gnd,2x SDA&SCL), while allowing four of those to be shared with other I²C...
In the details section of this project you will find a detailed analysis of the I2C bus and how it works, both electrically and in software. Make sure you read this before proceeding, so you understand what the code is doing. We're going to use the NodeMCU...
Before starting a pack build yourself I would highly recommend you finish all of your ongoing projects that you can, because this will take a huge percentage of your focus. First a finished pack photo because I know many of you won't read to the end:...
For those of you who prefer to watch something instead of reading I have created a detailed tutorial video. Don't worry though, everything in the video (and a little more) is all explained in this guide. Though, even if you will read through this guide...
With the ESP it is common to use the deep sleep mode to conserve power, but when waking from deep sleep it starts from the beginning, contents of every variable forgotten. Often this is OK, but if you want to store a state, configuration value...