Close

3734 Results for "《〈 문의 OIO↗5793↗7458 》〉강남초원의집㉩⅓everythingァ강남유흥강남룸㏁evidently 강남초원의집강남더킹 강남더킹‡강남룸Ⅹfaintly㈆"

  • Step 2: build your own funny robot
  • Instructions     from Modular 5-bar robot
  • First of all, fix the servos bases to the base using the M5 screws and nuts like so. In case you are using the extra screws as support, place the larger ones on the corners as seen on the following image. If instead you are using anything else as support...

  • Pressure Cooker Vacuum Chamber
  • Instructions     from Pressure Cooker Vacuum Chamber
  • Step 2: Prepare the pressure cookerNow for the fun part. In this step, you'll be drilling a hole in your nice shiny new pressure cooker. I know, it's tough, but it's for a good cause.You're going to need: A metalworking drill pressThe pressure cookerA...

  • Raspberry Pi Vintage Arcade
  • Instructions     from Raspberry Pi Vintage Arcade
  • Ripping Everthing Apart!This is the fun part.Find yourself an old LCD Monitor.. Thrift Shops are great for this.I got my LCD Monitor used in the arcade for $8!I took everything apart on it, to save space, weight, and because I was mounting it into a...

  • WRONG PROJECT 2
  • Instructions     from WRONG PROJECT 2
  • Step 5 Ball milling to break up clumps of dried nano carbons.Ball mill all of the prepared nano carbons, they will naturally agglomerate when dried to completion as all the water molecules are pulled from the inter-facial regions.Ball milling will break...

  • CycloSound V4.0
  • Instructions     from CycloSound V4.0
  • Step 5: Have a beer.If you have done all of this and you have a functioning stereo system on a bike that can handle everything I told you to throw at it, then congratulations, you've earned a beer or other beverage of your choice. Enjoy it while marvelling...

  • Ridiculous [LCD] Display Hacks
  • Instructions     from Ridiculous [LCD] Display Hacks
  • It's like in this one version-increment (of 8 now) they decided to ditch *everything* that's been 'round and well-supported for ages. And all because my Friggin' Firefox was about to be phased-out of support by Youtube. And mistakenly thought I'd get...

  • Home Automation - Garage Door Opener
  • Instructions     from Home Automation - Garage Door Opener
  • openhab.local - gdoPi Interface SupportDownload the provided project files for openhab.local and install in their appropriate directories. Make sure to reset ownership to 'openhab' user./etc/openhab/configurations/openhab.cfg/etc/openhab/configurations/items/default.items/etc/openhab/configurations/sitemaps/default.sitemapsudo...

  • Floating, Bamboo Makerspace
  • Instructions     from Floating, Bamboo Makerspace
  • Tying Wood (Ba'at)Most of the boats are made just by tying things together REALLY TIGHTLY. They call this process "Ba'at" in Visayan.To do this just follow these steps:Get a long piece of nylon cord (or tire rubber, or string)Tie one end around some...

  • Floating, Bamboo Makerspace
  • Instructions     from Floating, Bamboo Makerspace
  • Connect and Test a full moduleConnectFinally, lift the roof onto the frame, and tie it all together! Video shows some close up looks at the whole thing!TestAgain, it's super helpful to make sure everything floats in the water! Also, since it's modular,...

  • The Atomik Controller
  • Instructions     from The Atomik Controller
  • Syncing and De-Syncing bulbsMore than one bulb can be synced to the same Device.1. Make sure power is turned off to the bulb(s) that you are going to Sync or De-Sync.2. On the Device page, after all the properties are filled in and saved, click the Sync...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday